PDA

View Full Version : vane %'s??



hondarider552
October 7th, 2008, 05:42 PM
I wanted more whistle at idle on my lbz, OS:6128, so i changed the vane target posistions from 600-1000 rpm to 96% in 0-15 mm3, and from 0-300rpm 0-15mm3, to stock, (56%). Is their any harm to doing this? can i go to 100%?

hondarider552
October 9th, 2008, 03:26 PM
no one??

DmaxHawk
October 10th, 2008, 02:18 AM
I would keep the 0-300 stock and move the 600-1000 to 99%. Only problems that I can think of is that if I move my vanes to 99%,(dont see why you cant put them at 100 just my personal preference at 99%) it sometimes hesitates on startup. I'm guessing its the vane sensor test trying to calibrate on an hard angle?:nixweiss:

Another problem is that the cool down takes a looong time with the vanes at 99.

hondarider552
October 10th, 2008, 04:39 AM
I would keep the 0-300 stock and move the 600-1000 to 99%. Only problems that I can think of is that if I move my vanes to 99%,(dont see why you cant put them at 100 just my personal preference at 99%) it sometimes hesitates on startup. I'm guessing its the vane sensor test trying to calibrate on an hard angle?:nixweiss:

Another problem is that the cool down takes a looong time with the vanes at 99.yes, i have noiced that cooldown takes a lot longer with the vanes closed, but owell gotta do it anyway one more minute doesnt hurt.
thanks for your input.