PDA

View Full Version : Cant perform relearn..help



slow89irocz
October 15th, 2008, 01:12 PM
Any ideas what I am doing wrong?? 411 PCM running cal from 2002 chevy express l31. 12212156 OS
Temp--180
VSS--0
TPS--0
Trans in Park
Only DTC reported is P1336 it is listed a few times.
Hit F12
Choose 99-08 PCM
Hit activate
Learning Tab
Hold brake
Hit CASE
EFI Live does nothing when I hit the CASE button????

Blacky
October 16th, 2008, 08:25 AM
After clicking case the re-learn procedure requires that you raise the engine revs to 4500-5000rpm (over about 1-2 seconds) until you hear the fuel cut momentarily. Then let off the throttle and allow the engine to return to normal idle speed. Then ignition off for 15-30 seconds to allow the ECM to save the learned data.

Regards
Paul

slow89irocz
October 16th, 2008, 01:54 PM
does EFI live do anything after the CASE button is pressed? I hit it and nothing at all happens

Blacky
October 16th, 2008, 02:08 PM
Nothing that you will notice. EFILive sends the CASE learn command to the vehicle. The vehicle then waits for the operator to perform the CASE learn RPM increase.

Regards
Paul