PDA

View Full Version : Error code



Toired Old Man
October 23rd, 2008, 04:06 PM
when using v2 in stand alone mode, trying to erase DTC's I get this error code
$0281 anybody know what it is

ScarabEpic22
October 23rd, 2008, 04:39 PM
According to the error files in the V8 folder, it means "No data received". Cant help you out on how to fix it, but what firmware and boot block are you running?

Toired Old Man
October 23rd, 2008, 06:07 PM
According to the error files in the V8 folder, it means "No data received". Cant help you out on how to fix it, but what firmware and boot block are you running?



V8.1 Bootblock v2_05_08 Firmware v2_05_20

joecar
October 23rd, 2008, 08:00 PM
What vehicle/PCM...?

Blacky
October 23rd, 2008, 11:23 PM
When you press Ctrl+Ok, do you see any VPW/CAN indication in the lower right corner of FlashScan's screen?
If you do then FlashScan is communicating with the vehicle ok.
If not then FlashScan cannot communicate with the vehicle.

Try updating to the latest boot block (V2.06.02) and firmware (V2.06.04)

Regards
Paul

Toired Old Man
October 24th, 2008, 02:20 AM
What vehicle/PCM...?

LLY 05
I can record / flash and do other things, I just get this when I try and erase the DTC's

Toired Old Man
October 24th, 2008, 02:25 AM
When you press Ctrl+Ok, do you see any VPW/CAN indication in the lower right corner of FlashScan's screen?
If you do then FlashScan is communicating with the vehicle ok.
If not then FlashScan cannot communicate with the vehicle.

Try updating to the latest boot block (V2.06.02) and firmware (V2.06.04)

Regards
Paul

I can Record, scan, flash, gather DTC's I just can't erase, to erase I have been reflashing to get rid of them. I removed the EGR completly and keep getting 1404 EGR closed, No Mil, no report

Blacky
October 24th, 2008, 08:17 AM
V8.1 Bootblock v2_05_08 Firmware v2_05_20

There was a problem that caused DTC reading to fail when reading LBZ/LMM - if your LLY is a late 2006 model with the Bosch controller then the problem will affect your LLY as well.

Try updating to the latest boot block (V2.06.02) and firmware (V2.06.04).
You can get the updates by downloading and installing EFILive V8.1.2. Then when you run EFILive Explorer you will be notified that you need to update your boot block and firmware.

The V8.1.2 download is available here:
http://www.efilive.com/index.php?option=com_content&view=article&id=48&Itemid=124

Regards
Paul