PDA

View Full Version : IM-240 emisson test



limited cv8r
October 25th, 2008, 02:28 AM
Does anybody have any tips for how to tune a 5.7 geniii to pass an IM240 test with a supercharger fitted in Aus. Expensive test here in Aus so would like to get it right first time.

gmh308
October 26th, 2008, 01:19 AM
Does anybody have any tips for how to tune a 5.7 geniii to pass an IM240 test with a supercharger fitted in Aus. Expensive test here in Aus so would like to get it right first time.

Actually free in NSW. For now. :shock:

sreve
October 31st, 2008, 08:05 AM
turning off the diagnostics with no error reporting will
make the monitors show ready

gmh308
October 31st, 2008, 11:56 AM
turning off the diagnostics with no error reporting will
make the monitors show ready

IM240 is an actual 4 minute long test over 2km (1.3 miles) where total emissions are tested from hot start & through a drive cycle on rollers.

Limited CV8R: Is this a voluntary or in-voluntary test? Any feedback so far on what can be done tune wise to keep you in the ballpark.

HAve a good weekend!

sreve
October 31st, 2008, 12:25 PM
we used to have that here now they just plug in.
monitors set no active faults = pass life is good

one good tip i have heard for the rollers is run the air pump
(if you have one?)