PDA

View Full Version : Alerting Feature Request and Question...



Goldfinger911
October 30th, 2008, 06:06 AM
I was wondering if there is a way to use simple if/and/then logic with respect to the V2's audio and LED alerting functions.

Meaning; instead of say sounding an audible alert and/or lighting an LED when a single threshold is met, can we make is contingent on multiple conditions?

Example:

Alert 1: KR > 0, then sound an alert. <--- the way it is today
Alert 2: AFRWB01 > 12.80 and TP is >90% <--- mutiple condition alert
Alert 3: AFRWB01 > 11.80 and S1 input sees +12v. <--- multiple condition with an input trigger

With alert 3, I was thinking that I could wire the 12v+ side of my nitrous trigger relay to the V2, then I would be able to alert if I go lean or get knock, while spraying N2O.

Thanks guys.

Goldfinger911
November 3rd, 2008, 08:07 AM
?????????????

joecar
November 3rd, 2008, 10:48 AM
I pm'd Paul, he will see this, he's on his way to SEMA at the moment.

Goldfinger911
November 3rd, 2008, 11:27 AM
No worries. Thanks man!

Blacky
November 3rd, 2008, 07:06 PM
No, there is not currently a way to do that on V2.
I am designing a way to support limited calculated PIDs on the V2. That may provide the functionality you need to configure a workable solution.

Regards
Paul

Josh61513
November 4th, 2008, 02:48 AM
I am designing a way to support limited calculated PIDs on the V2.
Regards
Paul

Great to hear Paul!

Thanks!

2002_z28_six_speed
November 4th, 2008, 06:07 PM
You could do with a little simpler.

Nitrous is only on at WOT. Program the WB for any AFR leaner than 11.50 = 1
Alarm S1 on value =1

Place relay in between WB and V2 that is open when not WOT and closed when WOT.

Problem solved.