joecar
October 30th, 2008, 08:33 AM
Paul,
I have a suggestion... :)
After selecting a pid list, V2 displays a screen showing the name of the pid list for a few moments (along with an "OK" button) and then after the few moments have elapsed displays the opening/main menu (Select PID list, Scantool, ....);
my suggestion is to do away with that screen and instead go straight to the opening/mian menu... and display the name of the current/active pid list across the top of the screen (in place of "FlashScan V2"... can still display "FlashScan V2" for a few moments when first starting up and if no pid list is active).
this way the user doesn't have to be distracted by that screen and can go straight to Scantool. :rockon:
$0.02 (is that 2 bits...?)
Cheers
Joe
:cheers:
I have a suggestion... :)
After selecting a pid list, V2 displays a screen showing the name of the pid list for a few moments (along with an "OK" button) and then after the few moments have elapsed displays the opening/main menu (Select PID list, Scantool, ....);
my suggestion is to do away with that screen and instead go straight to the opening/mian menu... and display the name of the current/active pid list across the top of the screen (in place of "FlashScan V2"... can still display "FlashScan V2" for a few moments when first starting up and if no pid list is active).
this way the user doesn't have to be distracted by that screen and can go straight to Scantool. :rockon:
$0.02 (is that 2 bits...?)
Cheers
Joe
:cheers: