E38 Fans patch not being applied

[Highlander]

I have done the procedure a few times and it still displays the same start up temp.

This is on a 2007 z06.

I am wondering if it has anything to do that the car was ls2edited.

Thanks

[ScarabEpic22]

Have you tried reflashing with a stock tune file (full flash if you can, cant remember if we can yet on E38s) then applying the patch?

[izaks]

Fan patch has not worked correctly since build 64

[Highlander]

How can I make them start correctly?? installing a lower build?

[izaks]

I did a car today and found the following.
Follow the normal process to aaply the patch.
Then open G0901. The first vaue is still 89'C, but it repesents a value about 9'C lower.
If you want to activate the fans at 90'C, then change the % in the 99'C.
You might have to play with values to get the desired values.

[Highlander]

oohh.. Interesting.. will do that tomorrow when the car comes in.

[Highlander]

Confirmed.. its working...

[Black02SS]

Labels do appear incorrect for me.

[Highlander]

yes.. but they are working correctly as said above