V2 acts up with the Serial connected

[nonnieselman]

Tryin to connect the LC1 to my V2 and when i try to use the up and down arrows its kinda like it freezes up, but then it always goes farther than i wanted. It also doubles every action.
For instance:
Say at the "Home Screen" i Press F2.
It goes to Scan tool then Diagnostics. But i only pressed F2 Once!

Now matter what i do it acts like i pressed the button twice.
As soon as i unplug the Serial cable it acts normal.

I also followed the "Serial Wideband Tutorial" twice..

So whats up with that?

[Blacky]

Sounds like there may be a problem with FlashScan's settings. Try setting them back to factory defaults...

Using EFILive_Explorer, delete the Settings.dat file from FlashScan's [Config] folder. Then power down FlashScan and repower it.

Let me know if that does not solve the problem.

Regards
Paul

[nonnieselman]

Sounds like there may be a problem with FlashScan's settings. Try setting them back to factory defaults...

Using EFILive_Explorer, delete the Settings.dat file from FlashScan's [Config] folder. Then power down FlashScan and repower it.

Let me know if that does not solve the problem.

Regards
Paul

Ill try that when i get home Thursday..
Thanks