PDA

View Full Version : 2bar & reduced power



minytrker
November 19th, 2008, 05:45 AM
I have a 2001 vette with a kenne bell super charger with heads and cam. I started tuning it until it maxed out the MAF, so I then switched it to SD and installed a 2 BAR map. I set the map up like the tutorial said. Stock was reading 14.8 and I have the 2 bar reading the same. Now how ever when ever it starts building boost it keeps going into reduced power mode and throwing 1514 code. I have the tablke maxed out already with no luck. What am I missing? It made 540rwhp before it maxed out the MAF.

5.7ute
November 19th, 2008, 11:30 AM
If you are exceeding the pcm's hard limits you will need to scale the IFR,VE table.

Post your tune & a log so we can have a look.

minytrker
November 19th, 2008, 03:38 PM
Thats exactly what I ended up doing to fix it.