PDA

View Full Version : E38 Calc VE broken?



ringram
November 22nd, 2008, 09:59 PM
Hi all, just trying to get CalcVE working to baseline the VVE table from the MAF before going SD in the new 440 cube monster and I have selected all the component parts which it says are valid, but there is a devide by zero error. Im guessing in the "displacement" function. Can I change this manually? Is it in litres or cubes? and per cylinder or engine total?

Im running the latest setup 7.5.5.73

Pic below

http://www.systemsup2.plus.com/images/calcve.jpg

joecar
November 22nd, 2008, 10:09 PM
Edit->Customer Details->Vehicle Options->Displacement.

ScarabEpic22
November 22nd, 2008, 10:13 PM
Also, I just noticed theres a new upgrade available to update to build 74, maybe update for shits and giggles? Sorry I cant help about your problem though. :(

ringram
November 23rd, 2008, 12:16 AM
Edit->Customer Details->Vehicle Options->Displacement.

Did that mate, still no good. Also thats only good for stock displacement, not 440 cubes etc. I chose 7L still no go.

Also now on .74 :(

Bruce Melton
November 23rd, 2008, 02:03 AM
(b0104)>.9 ?

ringram
November 23rd, 2008, 03:18 AM
Yep, thats set to 0.90 as you say already Sir :)

Anybody know what value that should be? I take it its metric but is it the 0.90 or 7.2? Maybe Ill fiddle with a new user defined static one.

5.7ute
November 23rd, 2008, 07:20 PM
Check out this thread Richard. http://forum.efilive.com/showthread.php?t=5607&highlight=displacement
Seems to be a recurring problem for some reason.
In my older build I just added the metric displacement into the generic file txt to get me going.

ringram
November 30th, 2008, 02:52 AM
Aha, cool thanks mate.