PDA

View Full Version : FlashScan V2 OBDII Cable


minytrker
November 24th, 2008, 02:24 AM
Where can I get one? Shipping is to much to order from online store. Anyone here in US sell them? I need one this week.
ScarabEpic22
November 24th, 2008, 03:33 AM
I think Ira at Fish Tuning probably has them, in CA.
minytrker
November 24th, 2008, 04:12 PM
Anyone on east coast, hve one? I wont get it from CA in time without over nighting in.
redhardsupra
November 24th, 2008, 05:04 PM
i can let you borrow mine ;)
Ira
November 24th, 2008, 08:06 PM
Where can I get one? Shipping is to much to order from online store. Anyone here in US sell them? I need one this week.

I always have all the spares in stock. I don't know of anyone else who does unless Jesse has one.

Ira
minytrker
November 25th, 2008, 02:12 AM
i can let you borrow mine ;)


Thanks Marcin. I'll give you a call if I end up needed it. The clip broke on mine that locks into the V2. Im trying to find another end and just swap out the ends on the plug.
mxracer
November 25th, 2008, 02:37 AM
That looks to be a standard RJ45 connection. You should be able to get that at Radio Shack, Lowes, or Home Depot and replace the end. They also carry tools for replacing the ends if you want.

http://www.homedepot.com/webapp/wcs/stores/servlet/ProductDisplay?storeId=10051&langId=-1&catalogId=10053&productId=100396326

BTW You don't have to buy 50 at a time, they have smaller packs at the store.

The tool, if you want is a little more expensive, but you can get by without it if your only doing one or two cables.