PDA

View Full Version : r.p.m. limits



smokethis
November 28th, 2008, 09:53 AM
Hello, I was wondering is it possible with the dsp5 to pick a position, say level 2, and limit the rpm's to 2000? The reason I ask is I read on here or diesel place that if you stay below 2000 rpm's that it keeps the main pilot? from opening up and that is where you really see a big fuel consumption increase. So what I am wanting to do is program level 2 to not go above 2000 rpm's which would give me about 68 mph. Thanks for any help.

DmaxHawk
November 28th, 2008, 10:19 AM
Assuming you have an LLY you need to adjust the rev limiter tables B0725 and B0726. Not sure if the rev limiter tables themselves would take care of that completely, so I would cut back on the fueling tables above 2k to make sure.

vortecfcar
November 28th, 2008, 08:23 PM
It's possible, yes. Throttle base injection quantity would be the table of choice.

Nick