PDA

View Full Version : Maffless e38. Auto gone harsh



alian
December 13th, 2008, 01:10 PM
Hey Guys, Been trying to tune my E38 L76A4 maffless and ever since I turned off the maff the Auto has gone into some sort of limp mode with the 1st to 2nd shift trying to rip the diff out under slight TP. What am I missing. Have P0101,2and 3 to no mill.Many thanks to anyone that can help. I know that there r plenty of E38 maffless autos out there so it is somthing I am doing wrong:doh2:.
Cheers Ian.

joecar
December 14th, 2008, 04:28 AM
Check tables E0101-4 for P0101-3... set these to No.

GMPX
December 14th, 2008, 10:49 AM
Actually Ian, it is a default setting in the trans we currently don't show in the software, if you want, Email your transmission file to support and I'll sort it out for you.

Cheers,
Ross

alian
December 14th, 2008, 11:19 PM
Actually Ian, it is a default setting in the trans we currently don't show in the software, if you want, Email your transmission file to support and I'll sort it out for you.

Cheers,
Ross

Thanks Ross, That would be great if u could do that. So even if you were doing the vve you should run with this aswell??
Cheers Ian

alian
December 16th, 2008, 10:04 PM
Thanks Ross, That would be great if u could do that. So even if you were doing the vve you should run with this aswell??
Cheers Ian

Hey Ross, Did you get the 2 auto tunes I sent.
Cheers Ian

gmh308
December 17th, 2008, 09:21 AM
Also have seen similar effects.....

alian
December 29th, 2008, 06:30 PM
Hey BIG Thanks to the EFILive boys, Just loaded the auto fix in and went to maffless and the auto is great again.
Many Thanks again Ian