EXT.WO2AFR1 invalid

[5.7ute]

I have had a search on here & cant seem to find the answer. I now have a V2 with Andy's serial cable which works perfect in black box mode. However when I try to log the serial wideband pids in pass thru direct to the laptop to rtacs etc the necessary pids are staying invalid. The 2nd LED flashes signalling serial data is being recieved but for some reason the pids will not validate when connected.
This is for an 0129005 COS5 operating system in a VY commodore. Any one else come across this problem or a solution.
Cheers Mick

[TAQuickness]

IRRC, you will need to run a PID validation while connected to V2 and the PCM to get the pass thru WO2 PID's to function. It's been a while since I've done pass thru logging though...

[5.7ute]

IRRC, you will need to run a PID validation while connected to V2 and the PCM to get the pass thru WO2 PID's to function. It's been a while since I've done pass thru logging though...

That was it. Thanks Andy.:cheers: