Transmission logging Commodore VR 5.0L

[RadVis]

I own EfiLive V4 Pro and was wondering if there is any way of logging the Auto transmission on a Commodore VR V8.
The infomation to control the Auto (Gear Hold) in the xml file, but I would like to log the Auto as part of the Engine Data Logging.
So if anyone has the relevent information to assist me that would be helpful.
:help2:

[Blacky]

We have not spent time figuring out the trans data stream, but I think it will be table $03. So if you create a new Request under the ECM Module, and set the Parameter to $03, then the data you'll get back (table $03) should be transmission data.

At some future stage we'll spend some time working out what each of the values in that data stream are.

See attached image, I've added the first two RPM and speed as they are fairly easy to figure out. Feel free to have a go at figuring out the rest of the data stream yourself, but its not easy.

You'll also need to add another macro to execute the new data stream request.

Regards
Paul

[RadVis]

Blacky,
Thankyou for the info. I will give it a try and see what I come up with.

If you get to the stage of wanting to test new functionality for V4, let me know, I would be very interested, and in a few other functions not currently in V4 also.
:grin: