PDA

View Full Version : Need help



jaydog
January 6th, 2009, 02:02 PM
I am trying to reflash my 2008 LMM for the first time. When I try to reflash I get a reflash failed, aborting.....See the screen snap shoot below. What am I doing wrong? I have the key in the on position and I do not have anyting on like radio, dome light, etc....

http://img.villagephotos.com/p/2004-1/595931/EFILiveScreenShot_2.jpg

jaydog
January 6th, 2009, 02:27 PM
The screen shot is kind of hard to read so here is the text from the EFI Live programming box when I try to reflash the ECM. I also just though of one other thing. My boost and pyro guages come on when I turn the key to the on position. I have no way to turn them off other than disconnect the power lead. Could this cause a problem?

20:12:52.468: Scanning for EFILive FlashScan V2 USB
20:12:54.906: Scanning for EFILive FlashScan V2 HAPI
20:12:54.984: Interface firmware version: 2.6.4
20:12:55.000: CAN-VPW Bridge Actived
20:12:55.031: Current protocol set to: "ISO 15765 CAN"
20:12:57.140: Current protocol: "ISO 15765 CAN"
20:12:57.187: Interface firmware model: FSV2
20:12:57.203: Interface firmware version: 2.6.4
20:12:57.218: Interface firmware date: Oct 22, 2008
20:12:57.234: FlashScan serial number: 003712317222
20:12:57.265: FlashScan license number: 003712317222
20:12:57.312: Getting status...
20:12:57.562: Status: OK.
20:13:12.984: Disconnecting ...
20:13:13.671: CAN-VPW Bridge Deactived
20:13:13.671: Disconnected
20:13:14.296: Scanning for EFILive FlashScan V2 USB
20:13:16.734: Scanning for EFILive FlashScan V2 HAPI
20:13:16.812: Interface firmware version: 2.6.4
20:13:16.859: Interface firmware model: FSV2
20:13:16.875: Interface firmware version: 2.6.4
20:13:16.890: Interface firmware date: Oct 22, 2008
20:13:16.921: FlashScan serial number: 003712317222
20:13:16.937: FlashScan license number: 003712317222
20:13:16.953: Disconnecting ...
20:13:17.625: CAN-VPW Bridge Deactived
20:13:17.625: Disconnected
20:13:18.265: Scanning for EFILive FlashScan V2 USB
20:13:20.687: Scanning for EFILive FlashScan V2 HAPI
20:13:20.765: Interface firmware version: 2.6.4
20:13:20.781: CAN-VPW Bridge Actived
20:13:20.812: Current protocol set to: "ISO 15765 CAN"
20:13:22.921: Current protocol: "ISO 15765 CAN"
20:13:22.953: Interface firmware model: FSV2
20:13:22.984: Interface firmware version: 2.6.4
20:13:23.000: Interface firmware date: Oct 22, 2008
20:13:23.015: FlashScan serial number: 003712317222
20:13:23.031: FlashScan license number: 003712317222
20:13:23.093: Getting status...
20:13:23.328: Status: OK.
20:13:24.265: Preparing ECM for reflash...
20:13:24.296: ECM seed is: $646E
20:13:24.296: Unlock attempt 1 of 1
20:13:24.421: Initializing ECM...
20:13:25.796: Request GM operating system...
20:13:25.812: GM operating system: 12628594
20:13:26.546: Request serial number...
20:13:27.421: Serial number: 864732012780
20:13:29.375: Reflashing ECM's memory...
20:13:34.906: Erasing ECM flash memory... (please wait up to 2 minutes)
20:15:37.937: ECM flash memory erased OK
20:15:50.406: Reflash failed, aborting...
20:15:50.406: Total time: 02:16
20:15:50.406: Data compression achieved: 0.0%
20:15:50.421: Attempting to reboot ECM... (please wait up to 8 seconds)
20:15:53.562: Waiting for ECM to complete reboot process... (Retry 1 of 8)
20:15:55.578: Waiting for ECM to complete reboot process... (Retry 2 of 8)
20:15:57.593: Waiting for ECM to complete reboot process... (Retry 3 of 8)
20:15:59.609: Waiting for ECM to complete reboot process... (Retry 4 of 8)
20:16:01.625: Waiting for ECM to complete reboot process... (Retry 5 of 8)
20:16:03.640: Waiting for ECM to complete reboot process... (Retry 6 of 8)
20:16:05.656: Waiting for ECM to complete reboot process... (Retry 7 of 8)
20:16:07.671: Clear emisison related DTCs...
20:16:09.812: Interface firmware version: 2.6.4
20:16:13.171: Reflashing completed successfully

GMPX
January 6th, 2009, 02:29 PM
Hi Jaydog,

What version of the software are you using?, it looks pretty recent from the screen shot.

jaydog
January 6th, 2009, 02:37 PM
Hi Jaydog,

What version of the software are you using?, it looks pretty recent from the screen shot.

v7.5.5 (build 77)

Blacky
January 6th, 2009, 10:09 PM
My boost and pyro guages come on when I turn the key to the on position. I have no way to turn them off other than disconnect the power lead. Could this cause a problem?

If those gauges get their data via the CAN data bus, then yes they will cause a problem during flashing.
Try disconnecting power to them to see if that resolves the problem.

Regards
Paul

jaydog
January 7th, 2009, 02:16 AM
If those gauges get their data via the CAN data bus, then yes they will cause a problem during flashing.
Try disconnecting power to them to see if that resolves the problem.

Regards
Paul

I will try that tonight after work.

jaydog
January 8th, 2009, 02:52 AM
Well, I disconnected the power to my guages and that was not it. I can read the ECM fine. But no matter what tune I try to upload back to it I get the same thing as stated above (reflash failed, aborting.....) Even when I try to upload the stock tune that I just downloaded from it.

Does anyone have any other ideas? My truck is sitting dead in the garage until I get this figured out. I just installed my 4" MBRP turbo back exhaust and EGR block plate and I do not want to start it until I get the right tune programmed in to block all the DPF and EGR codes. I have sent EFI Live support this information and have not heard back yet. Hopefully I can get this thing figured out soon. It sucks having a new D-Max sitting in the garage that I can not drive. Especially with the new exhaust on that I am excited to hear run and see what kind of power it has now.

jckleewein
January 8th, 2009, 08:30 AM
Well, I disconnected the power to my guages and that was not it. I can read the ECM fine. But no matter what tune I try to upload back to it I get the same thing as stated above (reflash failed, aborting.....) Even when I try to upload the stock tune that I just downloaded from it.

Does anyone have any other ideas? My truck is sitting dead in the garage until I get this figured out. I just installed my 4" MBRP turbo back exhaust and EGR block plate and I do not want to start it until I get the right tune programmed in to block all the DPF and EGR codes. I have sent EFI Live support this information and have not heard back yet. Hopefully I can get this thing figured out soon. It sucks having a new D-Max sitting in the garage that I can not drive. Especially with the new exhaust on that I am excited to hear run and see what kind of power it has now.

Do you have the latest firmware in the handheld?

Tordne
January 8th, 2009, 08:43 AM
He is going to try again soon with the latest update (Build 78) and let us know.

jaydog
January 8th, 2009, 09:07 AM
Do you have the latest firmware in the handheld?

How do you update the firmware in the handheld? I assume you would update it through the laptop? I have not had much time to read the manual or any tutorials yet. Thanks for your guys help.

nevinsb
January 8th, 2009, 09:12 AM
There are instructions for updating the firmware/bootloader here:
http://forum.efilive.com/showpost.php?p=84305&postcount=9