PDA

View Full Version : New rear - Will need a list of things to do



DebianDog
December 16th, 2004, 06:45 AM
I am having a 9" rear professionally installed in the T/A with 3.55 gears. The installer asked if I wanted him to reprogram it for me and I told him, "NO". As I plan to buy FlashScan on the 3rd.

Now, my question is... what exactly do I need to do? Should I download the eval to practice or will this be relitively painless?

87gmc
December 16th, 2004, 07:18 AM
From what i can tell on the demo version it should be very easy :D

DebianDog
December 16th, 2004, 08:39 AM
From what i can tell on the demo version it should be very easy :D

Good! I like easy :P

dissonance
December 16th, 2004, 09:50 AM
You should have no problems changing gears ratios with flash scan, I’ve programmed a 01 T/A with flash scan and it’s worked great…

SinisterSS
December 16th, 2004, 04:17 PM
In FlashScan, changing your speedo to read correctly is simply done by changing 2.73 to 3.55 in the speedometer table.

DebianDog
December 17th, 2004, 01:30 AM
In FlashScaan, changing your speedo to read correctly is simply done by changing 2.73 to 3.55 in the speedometer table.

That's what I am talking about!

Now to go figure out my shift points. I used to know where there was an online calculator for optimizing shifts based on torque....

Here is one (http://www.bgsoflex.com/shifter.html)

dissonance
December 17th, 2004, 04:53 AM
3.55's in a A4 thats going to be monster in 1st...

bink
December 17th, 2004, 05:39 AM
In FlashScaan, changing your speedo to read correctly is simply done by changing 2.73 to 3.55 in the speedometer table.

That's what I am talking about!

Now to go figure out my shift points. I used to know where there was an online calculator for optimizing shifts based on torque....

Here is one (http://www.bgsoflex.com/shifter.html)

Here is one based on torque http://www.cyberstangs.com/autocalc/calc_ShiftPoints.asp

Cheers,
joel

DebianDog
December 18th, 2004, 01:49 AM
3.55's in a A4 thats going to be monster in 1st...

With my Mickey Thompson ET streets... maybe I will be in second at the 60' mark :wink:

Here are the gears for anyone interested:
1st gear = 3.06
2nd gear = 1.62
3rd gear = 1.0
4th gear = 0.7

DebianDog
December 19th, 2004, 02:58 AM
Here is one based on torque http://www.cyberstangs.com/autocalc/calc_ShiftPoints.asp

Umm will need a another/good dyno I see...