PDA

View Full Version : OS Swap almost perfect


3fingas
February 2nd, 2009, 07:39 PM
Completed swapping an 02 OS in my 98 SS camaro. I built a forged LS3 w/ 98 sensors. Completed AutoVE and was happy with the results. My issue is bucking at 2000 thru 2800 and Im having a little trouble troubleshootin. My question is for the cells that werent hit (high rpm) in the VE table that were left heavy from adding 15%. Should I be lookin to drop these cells back or should I get some dyno time to hit every cell. Not sure that this is the bucking cause but figure I ask ones who know best.
Any input would be awesome.:rockon:
3fingas
February 3rd, 2009, 12:45 PM
No worries mates.
hquick
February 3rd, 2009, 12:53 PM
I think the general idea is to blend between cells that haven't been hit.
If you can get dyno time...that would be best.
5.7ute
February 3rd, 2009, 01:37 PM
I think the general idea is to blend between cells that haven't been hit.
If you can get dyno time...that would be best.

Agreed, you should see a trend that you can manually adjust the table to follow.
3fingas
February 3rd, 2009, 02:52 PM
got it. The Interpolation WS was a big help. In good now.