skippy
February 4th, 2009, 06:48 AM
I installed the 7.5 from the main page downloads section
wanted to play with it before I buy it..
installing on vista
run as administrator.
and it opens with an error about not being able to find cal_pids.txt
and then closes the whole thing..
HELP?!!
edit:
Error report generated by EFILive at 11:48:23 on Feb 04, 2009
Error code: ERR_WIN 0/0
Cannot open file "C:\EFILive\V7.5\User Configuration\calc_pids.txt". The system cannot find the file specified
EFILive Version: 7.5.5 (Build 78)
Platform: Windows NT
Version: 6.0 (build 6001)
Processor type: Pentium 1995MHz
Directories
Temporary Cache: \EFILive\V7.5\Temporary cache
Logged Data: \EFILive\V7.5\Logged data
Customers: \EFILive\V7.5\Customers
Configuration: C:\Program Files\EFILive\V7.5\Configuration
Exported Data: \EFILive\V7.5\Exported data
Images: \EFILive\V7.5\Images
Sounds: \EFILive\V7.5\Sounds
Maps: \EFILive\V7.5\Maps
Pids: \EFILive\V7.5\PIDs
Virtual Dash: \EFILive\V7.5\VDash
Print Reports: \EFILive\V7.5\Print reports
Bug Reports: \EFILive\V7.5\Bug reports
Connected: No
Auto connect: No
Scan OBDII info: No
Error retries: 1
Retry delay: 10
Message throttle: 0
Most recently used VIN: xxxxxxxxxxxxxxxxx (Note: 1)
PCM information
Unknown: Unknown
Unknown: Unknown
Unknown: Unknown
Unknown: Unknown
Unknown: Unknown
Unknown: Unknown
Unknown: Unknown
Unknown: Unknown
Unknown: Unknown
Unknown: Unknown
Unknown: Unknown
Unknown: Unknown
Stream-Slow scan mode: Unknown
Stream-Fast scan mode: Unknown
Maximum dynamic packets: Unknown
Most recent communication with vehicle:
Report ID: 114046 (Note: 2)
Notes:
(1) The VIN sequence number is not required for this report and for your privacy it is NOT included in this report.
(2)The report ID is a checksum of the report text and is used to verify the integrity of the report.
wanted to play with it before I buy it..
installing on vista
run as administrator.
and it opens with an error about not being able to find cal_pids.txt
and then closes the whole thing..
HELP?!!
edit:
Error report generated by EFILive at 11:48:23 on Feb 04, 2009
Error code: ERR_WIN 0/0
Cannot open file "C:\EFILive\V7.5\User Configuration\calc_pids.txt". The system cannot find the file specified
EFILive Version: 7.5.5 (Build 78)
Platform: Windows NT
Version: 6.0 (build 6001)
Processor type: Pentium 1995MHz
Directories
Temporary Cache: \EFILive\V7.5\Temporary cache
Logged Data: \EFILive\V7.5\Logged data
Customers: \EFILive\V7.5\Customers
Configuration: C:\Program Files\EFILive\V7.5\Configuration
Exported Data: \EFILive\V7.5\Exported data
Images: \EFILive\V7.5\Images
Sounds: \EFILive\V7.5\Sounds
Maps: \EFILive\V7.5\Maps
Pids: \EFILive\V7.5\PIDs
Virtual Dash: \EFILive\V7.5\VDash
Print Reports: \EFILive\V7.5\Print reports
Bug Reports: \EFILive\V7.5\Bug reports
Connected: No
Auto connect: No
Scan OBDII info: No
Error retries: 1
Retry delay: 10
Message throttle: 0
Most recently used VIN: xxxxxxxxxxxxxxxxx (Note: 1)
PCM information
Unknown: Unknown
Unknown: Unknown
Unknown: Unknown
Unknown: Unknown
Unknown: Unknown
Unknown: Unknown
Unknown: Unknown
Unknown: Unknown
Unknown: Unknown
Unknown: Unknown
Unknown: Unknown
Unknown: Unknown
Stream-Slow scan mode: Unknown
Stream-Fast scan mode: Unknown
Maximum dynamic packets: Unknown
Most recent communication with vehicle:
Report ID: 114046 (Note: 2)
Notes:
(1) The VIN sequence number is not required for this report and for your privacy it is NOT included in this report.
(2)The report ID is a checksum of the report text and is used to verify the integrity of the report.