"Axle Torque Limiting" and AFM

[VEGASROBBI]

The new AFM Inhibiting Pids has given me a better understanding why my AFM is not enabling.

At this stage the only inhibiting factor I see in the data list is "Axle Torque Limiting". I tried to turn off the axle protection parameters under "Torque Control" but "Axle Torque Limiting" is still the inhibiting factor.

I posted my data log in the AFM Log post, Thanks.

[harascho]

forget about the axle torque limiting stuff.... Ha it's a glitch in the PID definition. Just read my AFM log thread and download the new GM_enhanched file.

Then you will end with the same inhibiting factor as I have: Your ECM thinks that the drivetrain is in 4wdlo.. welcome to the club Robbie.

Harald

[VEGASROBBI]

OK Harold, IM going to set my tune to a 2WD and try it again, this way it can't think it's in 4WD?

[harascho]

so Robbie, we will need a complete OS and 2wd tune I guess.

Has anybody a 2007 2wd tune for a Tahoe/Suburban/.../..