# ============================================================================== # File details # ------------ # # This section defines various details about the file format. *FILE #Parameter Value Description #---------- ---------------- --------------------------------------------------- VERSION 7.1.1 File version DECSEP . Decimal separator used in this file # calc_pids--E38-LTFT-1WB # ============================================================================== # Units # ------------------- # See sae_generic.txt for more information on the *UNITS section *UNITS #Code System Abbr Description #-------- ---------- -------- ------------------------------------------------------------- None None "" "No units" K Metric "K" "Degrees Kelvin" R Imperial "R" "Degrees Rankine" LAM None "LAM" "Lambda" EQR None "EQR" "Equivalence Ratio (1/Lambda)" # ============================================================================== # Add slot definitions here # -------------------------------- # See sae_generic.txt for more information on "SLOT" formats # #Units Low High Fmt Expression #------------ ------------- ------------- ---- -------------------------------------------------------------- *CLC-00-011 % 0.0 100.0 .1 "{GM.INJPWB1}*{SAE.RPM}/1200" *CLC-00-012 % 0.0 100.0 .1 "{GM.INJPWB2}*{SAE.RPM}/1200" *CLC-00-050 None 0 4 .0 "{SAE.LAMBDA}=1" *CLC-00-080 V 0.0 5.0 .2 "{GM.ACP}" AFR 9.0 16.0 .2 "{CALC.WB.V}*1.4+9" LAM 0.5 1.5 .3 "{CALC.WB.AFR}/14.55" EQR 0.5 1.5 .3 "1/{CALC.WB.LAM}" *CLC-00-110 factor 0.5 1.5 .4 "{CALC.WB.LAM}/{SAE.LAMBDA}" *CLC-00-120 factor 0.5 1.5 .4 "({SAE.LONGFT1}+{SAE.LONGFT2})/200+1" *CLC-00-160 factor 0.5 1.5 .4 "iff({CALC.TRIMMING},{CALC.LTFTBEN},{CALC.WO2BEN})" *CLC-00-273 C 0.0 100.0 .1 "{SAE.IAT.C}" F 40.0 220.0 .1 "{SAE.IAT.F}" K 280.0 380.0 .1 "{CALC.DAT.C}+273.15" R 500.0 680.0 .1 "{CALC.DAT.F}+459.67" *CLC-00-290 VE 0.0 4.0 .4 "{E38.SCALEDUNVE_DMA}/1000" *CLC-00-300 VE 0.0 2.468 .4 "{SAE.MAF.gps}*{CALC.DAT.K}/{SAE.MAP.kPa}/{SAE.RPM}*15" *CLC-00-302 VE 0.0 2.468 .4 "{CALC.SELBEN}*{CALC.VEN.VE}" *CLC-00-310 gps 0.0 400.0 .1 "{CALC.SVE.VE}/{CALC.DAT.K}*{SAE.MAP.kPa}*{SAE.RPM}/15" *CLC-00-312 gps 0.0 400.0 .1 "{CALC.SELBEN}*{CALC.MAFN.gps}" *CLC-00-430 VE 0.0 4.0 .4 "{E38.APCYL_DMA}*{CALC.DAT.K}/{SAE.MAP.kPa}" *CLC-00-440 gcyl 0.0 1.0 .4 "{CALC.SVE.VE}/{CALC.DAT.K}*{SAE.MAP.kPa}" # ============================================================================== *PRN - Parameter Reference Numbers # -------------------------------- # See sae_generic.txt for more information on the *PRN section # #Code PRN SLOT Units System Description #------------------------- ---- ------------ ---------------- ---------------- ------------------------------------------ CALC.INJDCB1 F011 CLC-00-011 % Tuning "Injector Duty Cycle Bank 1" CALC.INJDCB2 F012 CLC-00-012 % Tuning "Injector Duty Cycle Bank 2" CALC.TRIMMING F050 CLC-00-050 None Tuning "Trimming Indicator (based on commanded stoich)" CALC.WB F80 CLC-00-080 "V,AFR,LAM,EQR" Wideband "Wideband V, AFR, LAM, EQR" CALC.WO2BEN F110 CLC-00-110 factor Tuning "BEN from WB" CALC.LTFTBEN F120 CLC-00-120 factor Tuning "BEN from LTFT" CALC.SELBEN F160 CLC-00-160 factor Tuning "BEN selected from WB or LTFT" CALC.DAT F273 CLC-00-273 "C,F,K,R" Tuning "Dynamic Air Temperature" CALC.SVE F290 CLC-00-290 VE Tuning "Scaled VE (from VE Coefficients)" CALC.VEN F300 CLC-00-300 VE Tuning "Calculated VE (from MAF)" CALC.VET F302 CLC-00-302 VE Tuning "Calculated VE (from MAF), Corrected by BEN" CALC.MAFN F310 CLC-00-310 gps Tuning "Calculated MAF (from VE)" CALC.MAFT F312 CLC-00-312 gps Tuning "Calculated MAF (from VE), Corrected by BEN" CALC.VEDCA F430 CLC-00-430 VE Tuning "Calculated VE (from DCA)" CALC.DCAVE F440 CLC-00-440 gcyl Tuning "Calculated DCA (from VE)"