# ============================================================================== # File details # ------------ # # This section defines various details about the file format. *FILE #Parameter Value Description #---------- ---------------- --------------------------------------------------- VERSION 7.1.1 File version DECSEP . Decimal separator used in this file # ============================================================================== # Units # ------------------- # See sae_generic.txt for more information on the *UNITS section *UNITS #Code System Abbr Description #-------- ---------- -------- ------------------------------------------------------------- None None "" "No units" K Metric "K" "Degrees Kelvin" R Imperial "R" "Degrees Rankine" L None "L" "Lambda" # ============================================================================== # Add slot definitions here # -------------------------------- # See sae_generic.txt for more information on "SLOT" formats # #Units Low High Fmt Expression #------------ ------------- ------------- ---- -------------------------------------------------------------- *CLC-00-435 % -100 100 .4 "(({CALC.AEM_AFR}-{GM.AFR})/{GM.AFR})*100 *CLC-00-440 AFR -100 100 .2 "(({EXT.AD1}*16.21)/100)+1.499-1" # ============================================================================== *PRN - Parameter Reference Numbers # -------------------------------- # See sae_generic.txt for more information on the *PRN section # #Code PRN SLOT Units System Description #------------------------- ---- ------------ ---------------- ---------------- ------------------------------------------ CALC.ERROR F435 CLC-00-435 % Tuning "Command vs Actual Error" CALC.AEM_AFR F440 CLC-00-440 AFR Tuning "AEM Wide Bad AFR"