# ============================================================================== # File details # ------------ # # This section defines various details about the file format. *FILE #Parameter Value Description #---------- ---------------- --------------------------------------------------- VERSION 7.1.1 File version DECSEP . Decimal separator used in this file # ============================================================================== # Units # ------------------- # See sae_generic.txt for more information on the *UNITS section *UNITS #Code System Abbr Description #-------- ---------- -------- ------------------------------------------------------------- None None "" "No units" # ============================================================================== # Add slot definitions here # -------------------------------- # See sae_generic.txt for more information on "SLOT" formats # #Units Low High Fmt Expression #------------ ------------- ------------- ---- -------------------------------------------------------------- *CLC-00-032 factor 0 1 .0 "{GM.EQIVRATIO}=1" *CLC-00-110 factor 0.5 1.5 .4 "{GM.EQIVRATIO}*{EXT.WO2LAM1}" *CLC-00-120 factor 0.5 1.5 .4 "({SAE.LONGFT1}+{SAE.LONGFT2})/200+1" *CLC-00-220 factor 0.5 1.5 .4 "iff({CALC.CL}, {CALC.LTFTBEN}, {CALC.WO2BEN})" *CLC-00-300 % 0.0 100.0 .2 "{SAE.MAF.gps}*({GM.DYNAIRTMP_DMA.C}+273.15)/{SAE.RPM}/{SAE.MAP.kPa}*3445.2/displacement()" VE 0.0 2.468 .4 "{SAE.MAF.gps}*({GM.DYNAIRTMP_DMA.C}+273.15)/{SAE.RPM}/{SAE.MAP.kPa}*15" *CLC-00-320 % 0.0 100.0 .2 "{CALC.SELBEN}*{CALC.VEN.%}" VE 0.0 2.468 .4 "{CALC.SELBEN}*{CALC.VEN.VE}" # ============================================================================== *PRN - Parameter Reference Numbers # -------------------------------- # See sae_generic.txt for more information on the *PRN section # #Code PRN SLOT Units System Description #------------------------- ---- ------------ ---------------- ---------------- ------------------------------------------ CALC.CL F032 CLC-00-032 factor Tuning "Closed Loop (based on EQIVRATIO)" CALC.WO2BEN F110 CLC-00-110 factor Tuning "BEN from Serial WB" CALC.LTFTBEN F120 CLC-00-120 factor Tuning "BEN from LTFT" CALC.SELBEN F220 CLC-00-220 factor Tuning "BEN selected from WB or LTFT" CALC.VEN F300 CLC-00-300 "%,VE" Tuning "Calculated VE, Not corrected" CALC.VET F320 CLC-00-320 "%,VE" Tuning "Calculated VE, BEN corrected"