b2 .CXZK[SOURCE],14
Binary=UPLOAD
Software=V8.02.12.361
Bootblock=V2.07.07
BootblockDate=20140207
Firmware=V2.07.129
FirmwareDate=20171217
BootLoader=E92__v1.0R
ObjVer=08.04.70
ObjDate=20171122
Serial=003601887868
License=003528976037
Alt Lic=003528976037
Device=FSV2
FileSystem=PassThru
[VEHICLE],19
Stream=E92
StreamID=37
VIN=3GTU2PEJ3GG152866
SN=1115309022RG
OS=12672612
BB=12656994
CVN=$0
CodeVer=0
CodePart=
BootVer=0
BootPart=
PartNumber=0
Code=
ProductID=
Name=
COSOnly=0
SDMKey=0
ManufactId=
Custom=0
[SEGMENTS],11
S00=12656994
S01=12672612
S02=12666205
S03=12665605
S04=12666276
S05=12673113
S06=12683846
S07=00000000
S08=00000000
S09=12653630
S10=12659035
[SECURITY],21
Read=1
Modify=1
AutoLock=0
Serial=0
License=0
Remote=0
Master=0
SN=0
Password=0
Checksum=1
CalFlashOnly=0
FullFlashOnly=0
OverrideOS=0
RemoteKey=
RemoteKeyFrom=
RemoteKeyTo=
TryAltKeys=0
AssumeLockFaulty=0
LowSpeed=1
CMFastCan=0
VIN=0
[INFO],19
CalibratedBy=.
ModifiedBy=.
Created=20180309
Modified=20180309
be viewed.
028=EFILive's Supported Vehicles list is constantly updated,
Click here to see a full list of vehicles you can tune.
029=Want to customize your FlashScan V2 start-up display? Click here for instructions.
030=AutoCal's splash screen may be customized to something other than "EFILive AutoCal".
Change the AutoCal splash screen text using the V8 software option: [F6: Devices]->[F5: Options].
031=A "Quick Setup" option allows tuners to create a complete AutoCal configuration/setup in a single file that can be emailed to a customer and easily installed on the customer's AutoCal device.
Use the V8 software option: [F5: BBX]->[F6: Quick Setup] to create and/or install quick setup files.
032=FlashScan and AutoCal contain special power up options that include booting devices into dead-poll mode and resetting device settings.
More info on power up options can be found here.
033=The contrast of FlashScan's with blue cases can be adjusted using
the V8 software option: [F6: Devices]->[F3: Display].
Or directly via FlashScan's menu F4 Options->F1 Setup->F1 Edit Settings->[Contrast].
034=You can record all diagnostic information, including VIN, OS, Serial, CVN and DTC data in a single operation using FlashScan or AutoCal in standalone mode.
- FlashScan: F3 Diagnotics->F4 Record All Diags.
- AutoCal*: Trouble Codes->Record Diags.
Then use EFILive Explorer to copy the saved data file to your PC.
* Advanced menu only. You may temporarily activate AutoCal's advanced menu by holding down the [Next] button while powering up AutoCal.
035=A boot loader RSA patch is available for late model Cummins 6.7L controllers.
Please see this document: Help->Documents->Cummins BootRSA Patch User Guide.pdf.
036=Default options can be configured in the Version 7.5 software using the [Permissions] tab page to automatically set security restrictions when saving files for use with remote AutoCal devices.
037=Using the [F8: Tools]->[F2: Search] feature you can search for tune and log files for specific criteria including:
- VIN
- Serial
- Operating System
- Remote license
038=The option: Edit->Properties->General->Files/Folders->"Auto-increment filename", allows you to configure a unique four digit ID to be appended to a tune file name each time the tune file is saved.
039=The option: Edit->Properties->General->Display->"Sort Controller Selection Lists Alphabetically", causes the controller selection lists to be sorted alphabetically instead of the default EFILive order.
040=A VIN pattern may be specified under security restrictions to restrict tune files to being flashed only into controllers that have a matching VIN.
For example, the VIN pattern: 6G1......6....... will match ONLY VINs that start with the three letters 6G1 and that also have a 6 at position 10.
041=Controller VIN, OS, Serial Number (and for Cummins controllers Calibration ID) can be displayed on FlashScan's or AutoCal's screen by selecting:
- FlashScan: F3 Diagnostics->F1 Display Info->F1 Display VIN/Info.
- AutoCal*: Scan Tool->Display VIN or Display OS or Display SN or Display Cal ID.
* Advanced menu only. You may temporarily activate AutoCal's advanced menu by holding down the [Next] button while powering up AutoCal.
SW Znߑz
3Қf5ۖ:,^32 ;戲WyY*3Se5lO%Z@[rmңu0wc* C鴍D̩[P]L'pۖxGc{X2M+m720G6ih:rWtL(=}ˈR'NCwTm*"C#[frdѣ
3⛢In0lv}ˈRXNw:Z
z}ˈnR_N7"`C