Help...
I can't figure out what I'm missing with adjusting this tune for an 800 RPM idle. It starts and Lterm goes rich after about a minute floods the car.
Any insight would be great.
This is what I adjusted ;
Engine Operation.Fuel.DFCO / CFCO
{B2421} DFCO Idle RPM Exit, modified. <<<Set to 770>>>
Engine Operation.Idle
{B1822} Maximum Idle Speed, changed from "1300" to "1125".
{B1821} Desired Idle Speeds, modified. <<<Set to 800>>>
{B1862} Minimum Idle Speeds vs Vehicle Speed, modified. <<<All fields set to 800>>>
{B1847} After Start Idle Speed, In Gear, modified. <<<@ 92C (ECT) roughly 800>>>
{B1848} After Start Idle Speed, P/N, modified. <<<@ 92C (ECT) roughly 800>>>
This is a manual transmission.
