August 2020, Beta 48, Release 7
**Edit** New software now available, please see the updated post in the Software Updates and Installation Help forum
ATTENTION - BETA SOFTWARE RELEASE
We strongly recommend that you do not install the beta software over the top of your production systems. It is possible that the beta test software may fail and your production system may not be recoverable. lf you conduct a tuning business, please take the necessary precautions to protect your business. EFILive recommends beta testers use a separate FlashScan V3/V2 device (when installing the latest beta firmware) and only install the EFILive beta test software on a separate PC, laptop or virtual machine.
This beta update contains a new CSP switchable tune operating system for CMF controllers. It is an "early access" feature that is not intended for production use just yet. EFILive is looking for feedback on the performance of the CMF CSP OS. Please do not install the CMF CSP OS on remote vehicles. Only install it on vehicles in your workshop that you can recover easily if the CSP5 OS causes problems.
For users dealing with the V3 AutoCal products you must use this release and ensure that all devices have the firmware updated to the version in this release prior to being used on vehicles.
The current public release is available here.
Changes to V8 software
- Added permanent DTCs display.
- Fixed EDA data logging that showed incorrect injector times under specific circumstances.
- The *.cax -> *.cax8 conversion process now reports line numbers when errors occur.
Changes to V2 firmware (V2.07.164)
- OS number was not displayed correctly for some CSP operating systems.
Changes to V3 firmware (V3.00.046)
- Fixed DMA PIDs logging as "N/A" for some controllers.
- Fixed wrong PID selection during black box logging.
Full Release Notes:
Version Numbers:After installing this beta release you should have the following software and firmware versions installed:
- EFILive V7 software: V7.5.31 To view the installed version, select Help->About (in the V7 Scan or Tune software).
- EFILive V8 software: V8.3.1 To view the installed version, select Help->About (in the V8 Scan and Tune software).
- FlashScan/AutoCal V3 Firmware: V3.00.046 (Aug 15, 2020).
- FlashScan/AutoCal V2 Firmware: V2.07.164 (Jul 30, 2020).
Download here:
Known Issues:
Issue #1:
When Black Box flashing a TCM with V3 it will incorrectly abort the flash with OS incompatibility error.
Workaround:
Use pass-through flashing instead until a firmware fix is available.
Regards,
The EFILive Team