Printable View
Where it says TRANSMISSION SHIFT POINT ADJUSTMENT in EFILive tune,speedometer,When I changed from 3.42 to 3.73 and 26in dia. tire it changed from 00.percent to -26.71 but when I saved it,It went back to zero percent.Do I manually change it or just leave it alone?....Thanks........Paul
Quote:
Originally Posted by driver456
You don't mention if you made the adjustment before you saved. If you adjusted then saved it goes to 0.
Thank You,Paul helped me out.And I got it all squared away:mrgreen:
Mind sharing?:nixweiss:Quote:
Originally Posted by driver456
Oh boy,its kind of confusing.But I'll try to explain.I had 3.42 gears put in.The PCM was programmed for the 3.42's.Then I took them out and put in 3.73's.I bought a hand held programmer(which I'am selling) And programmed my PCM for the 3.73's,But then decided to get EFILive ,Which is taking over my life:mrgreen: .I tried to flash my PCM,And read the calibration's,But it would not work.So I thought a minute and figured the hand held must have locked the PCM.Sooooo with the hand held I programmed the PCM back to stock and it set the gear ratio back to 2.73.So now EFILive works.Then I programmed it back w/EFILive to 3.42 then back to 3.73. I explained to Paul what I did,Then he told me what to do.I don't even remember how I did it,But I think I have worked it out.I think.:Eyecrazy:Quote:
Originally Posted by jfpilla
Not confusing. It makes sense.
Thanks
Joe