Printable View
I have just gone to COS5, and thanks to all the info on this site I had no problems getting it up and running. My question is this, why does my timing retard work with the switch, but VE modifier does nothing? I cannot find much info about this, do I have to be running SD? I have been over this thing 100 times today and any more info would be appreciated.
Can you post up your tune and logs?
I have had the same problem was it resolved?
mine seems to only work when i actually spray if not it hardly changes the afr. its weird i just tried it n/a and it did nothing but sprayed a 50 shot and went rich. i thought it worked without the n20 before the update but didnt seem to make a diffrence lately.
Are you absolutely sure the PCM is getting the trigger on it's pin when the NOS is not actually spraying?
Mine is on a toggle, I have 3 degree's pulled in the COS part of the tune. when I activate the toggle I can see the 3 degrees pulled immediately (as it should).Quote:
Originally Posted by GMPX
On the VE multiplier, I have set 1.1 to .9 for the value. This is to help it along at the lean side and then lean it out (the dry shot richens near the end). I have never seen this work. Eurospec1 says I should see the commanded AFR change when its active. I have not seen this happen when the toggle is on (but the timing pull works).
I have a new tune I am trying today from Doug @ ECS maybe it will work.
Worse case, maybe the tutorial or notes need to be a bit clearer on what values need to be in the COS 5 to enable the VE multiplier for Nitrous Monitor?
i had to put 1.3xx just to get in the 11.7 range on 150 shot dry.
any updates on this?
I still had the Maf plugged in. oops. Figured it out later that day. The program works excellent now. My best now is 11.08 with the nitrous, now to just get a progressive controller and eliminate some of this wheelspin.
FYI: I had great success with the VE modifier eliminating the lean spike going to a value of 1.2 in line with my window switch, and fine tuning my A/F after that. I am very satisfied with the addition of this.