lm-1 wide band

i have a lm1 wide band i take it if you just configure it to analog out like the lc-1 it will work the same allso has any one tryed using the lc-1 like a narrow band or lambda though the stock wiring then just datalog the voltage then you could just do the math on voltage to get the air fuel off lambda and use other analog out for there programable display meter any input thanks

I have datalogged the voltage no problem through the stock wiring no problem, fwiw.

It works fine, but if you log the nb sim, you wont get much detailed info.
If you are using it to tune VE you are better off logging it as WB in flashscan for a while and gettting that sorted first, you can then wire up the gauge afterwards.