V2 has lost it's licences

Ok, was using the V2 on a E38 controller the other day, has been used on this 1 controller since being purchased and has only been licensed to 2
other cars (I think lol).

Anyway was tuning my car on the dyno the other day and went to flash in a tune and told me that the PCM was not licensed. Given this V2 had
flashed this controller no less than 30 or 40 times, I was a little stunned.

Anyway checked in the tune/help/V2 licensing section and no licensed appeared at all.

Unplugged the V2 from the car, laptop etc etc, tried another laptop and nothing.

So my question is, WTF has happened and how does it get back to where it was with my licenses in tact.

Mine did the same thing a while ago. Update your V2 and firmware and they will come back

I think that is what I did :confused:


Cheers

Ben

Thanks mate, I will give it a go.

Very strange though that a tune was flashed in ok, logged then tried to flash again and nothing.

I checked it on a computer with an older version of V7 and nothing still not there.

Select the Tune Tool menu option: Help->FlashScan/AutoCal VIN Licensing.
Then click on the [Backup] button. That will save a backup of the license details stored in your V2.
The file will be called \Program Files\EFILive\V7.5\xxxxxxxxxxxx.lbu
where xxxxxxxxxxxx is your FlashScan's serial number.

Please send that file to me at paul@efilive.com

Regards
Paul

Email sent Paul.

Cheers

Can you also send me a screen shot of the license details of your FlashScan device?
i.e. the screen that shows up when you select: Help->FlashScan/AutoCal VIN Licensing...

I see the following licenses in your device:

Engine Trans
01: 16163AKUY, 741717506
02: 1C8AP1097, Available
03: 3C7U52253, Available
04: 0G02T0281, Available

Does that match what you see in the licensing details screen?

Regards
Paul

Second email sent.

When I select licences in the V2 it comes up with what you have above, but not when connected to different laptops with different versions of V7.5 running. Have tried different cables etc still nothing changes it.

Cheers
Nigel

Hi Nigel,

I replied via email but I am repeating it here in case anyone else has a similar problem.

Can you please download the latest software from here:
http://forum.efilive.com/showthread....-1-Aug-04-2011

Download and install both V7.5 and V8.
After installing V8, please update your FlashScan firmware to V2.07.19 using the EFILive_HAPI program.

Pretty much what Ben (Dieselman) posted in post#2.

Regards
Paul

Installing the newest version of software did fix the problem.

Thanks to those who replied.