LS1 engine on another car

What steeps need to be done in case a LS1 engine is installed on another car like ford, Nissan? The case I have here is that, a friend has 94 ZX, he put LS1 engine and has removed the un-necessary plugs, but the engine doesn't start, some one said you need to cancel the security of the PCM, then every thing will be okay, can some explain this, please

Set G0102 to none. What happens is without the correct signal from the BCM the vehicle will not be able to start.

Even if the VATs is still on , the engine should still fire and run for a few seconds then stop, so maybe he has other wireing or setup issues:doh2:

Quote:

---

Originally Posted by johnv

Even if the VATs is still on , the engine should still fire and run for a few seconds then stop, so maybe he has other wireing or setup issues:doh2:

---

Correct. We had this issue after the LS1 PCM upgrade. Vats needed to be disabled but the truck still fires...just dies immediately.
Check wiring and codes.

I will check and get back to u

Quote:

---

Originally Posted by 5.7ute

Set G0102 to none. What happens is without the correct signal from the BCM the vehicle will not be able to start.

---

u mean {G1201} Anti Theft Configuration

Quote:

---

Originally Posted by odd boy

u mean {G1201} Anti Theft Configuration

---

Yes, you are right. Set that to "none"

Cheers,

thanks guys