Would be nice to adjust the factory high idle not talking about the pto idle up . Change out side temp and engine temp of when it kicks in these truck have set to low . thanks shannon
Printable View
Would be nice to adjust the factory high idle not talking about the pto idle up . Change out side temp and engine temp of when it kicks in these truck have set to low . thanks shannon
dont both the out side and engne temp need to be adjusted? like know it kicks in at about 30 deg like to change that. thanks shannon
I found it to be a bit in the way aswell so about 2 days into logging i reached under and disconected the OBDII from the metal cradle it was attached to. i then reconnected the cable to the OBDII port and ran it behind the dash to come up through my console (its clean and no cable to be seen) now im just looking for a good cradle to be able to put the V2 in (to look cleaner/less clutter) and my laptop sits on an airdesk i already had in use in my truck.
did the high idle get taking care off with the newest update ?
Would it be possable to put a speedo calculator with the tuning tool to help the revs per mile like the Duramax have?
It seems as though the speedo is actually controlled by the ABS...which Efilive is currently not flashing any modules besides the ecm
Now that we have a timing calculator for main injection, how about a pilot timing calculator?
Mike
It would be nice to turn off the seatbelt light in the dash.
I know these have been mentioned, but I would like a report on their status.
Change Tire size
High idle
Thanks!