BBL installer update: June 22, 2008

Normally, I find them here:
C:\Program Files\EFILive\V8.1\Firmware
but I don't have .18 either... I thought I downloaded all of the latest stuff (Not from the updater), but I did a find for '*efw' and I don't see it.

I have 2_05_17(0622).efw for the latest.

Maybe a moderator can just post the firmware file already so we can stop playing seek and destroy!

HT

It is in thr V8.1 folder...

but the auto update doesn't seem to pull that file in... you have to manually install 8.1.

Looks like I only had build 63 of the tuning tool. I (Think) am downloading 64 now.

Was this updated somewhere other than the first page of this thread?

Ok, so it is on the main download page, not in this thread:
http://www.efilive.com/download.aspx

I no longer have a v8 folder. The only thing I can find in files for v8 is the installer wizzard.

I was able to get my firmware to the latest 2.05.18 but dont know if I have to reconfigure my configurations tab. if so, I am shit out of luck because I cant even fiind the file options ini

It should be here : C:\Program Files\EFILive\V8.1\Config

Quote:

---

Originally Posted by Ninety8C5

It should be here : C:\Program Files\EFILive\V8.1\Config

---

Ok, so I've got my spare V2 up to the latest .18 firmware..NO PROBLEM.


My main tuning V2 has: Firmware: 2.04.67 date: nov 14 07 and boot block: 2.04.09 Date:28 oct 06

Problem is the old firmware tool says I can't use it cause I have v.2.05.xx or greater.....but, in the unit it says I've got v2.04...

SO, NONE of the explorer/firmware tools will talk to my main V2....It works ok, but paul says it's ready for the new firmware....Now, it just won't take.:confused:

Chuck CoW

Quote:

---

Originally Posted by Ninety8C5

It should be here : C:\Program Files\EFILive\V8.1\Config

---

Nope, just checked. I dont have a v8 folder.

I did the download 2 times and both times its some wizzard crap for installing the updates.

I do have an old copy of 8.1 saved on a flash chip . Would that be what needs to be on my computer?

Ok I went into my trash bin and pulled out an old version of v8. I went through the install wizzard again and installed again so that it would update the folder. I went through the configuration process but does not look like there were any changes made.

I will have to try it to see what it does in the car. Now that I am gettin somewhere, my lm1 is getting a sensor timeing error. I guess That means I need a new sensor?

Quote:

---

Originally Posted by Blacky

Have you got the following versions running (check in the Help->About wiondow)

Scanner: V7.5.4 build 64
v7obdii.dll: V7.5.4 build 64
Tuner: V7.5.4 build 64
FlashScan firmware: V2.05.18 (Check using FlashSCan options: F4->F3->F1 then scroll down.

If you are running all those versions, can you (after the link fails),
first: save a trace file in FlashScan.
second: generate an error report in the Scan Tool software.

Send both files to me at [email protected] with a link to this thread so I can correlate the two.

Regards
Paul

---

Paul,

All the Builds I have are Build 63. Where do I get the Build 64 update?

Can I download the firmware 2.05.18 prior to the Build 64?

Thanks

Howard