options request : post your ideas

How About a RPM/MAP IBPW table were we could adjust the IBPW directly (Like VE).
Paul, we briefly touched on this a few years back I think regarding the dynamic calculations used by the PCM.
98 tigershark:devil_2::master::nuke::throw:
PS: Free licenses would also be nice!

Just a quick one to express a new idea. Yesterday I was playing around with a car with poor idle quality. Eventually nutted the issue out to be shot o2 sensors causing a super rich idle. During the troubleshot I used the DVT's a fair bit to adjust IAC, Timing and lastly Fuel to see the reaction with fuel turning out to be the problem. During this testing I wasn't really taking much note of the data as the trims were fine and I was just observing the nature of the car. The thought came to mind that having the DVT's available via the V2 would be a handy addition. What do you guys think? Is it feasible to incorporate the controls into the V2 firmware.

Ryan

Quote:

---

Originally Posted by macca_779

The thought came to mind that having the DVT's available via the V2 would be a handy addition. What do you guys think? Is it feasible to incorporate the controls into the V2 firmware.
Ryan

---

Working on it...
:)

Paul

Quote:

---

Originally Posted by macca_779

Just a quick one to express a new idea. Yesterday I was playing around with a car with poor idle quality. Eventually nutted the issue out to be shot o2 sensors causing a super rich idle. During the troubleshot I used the DVT's a fair bit to adjust IAC, Timing and lastly Fuel to see the reaction with fuel turning out to be the problem. During this testing I wasn't really taking much note of the data as the trims were fine and I was just observing the nature of the car. The thought came to mind that having the DVT's available via the V2 would be a handy addition. What do you guys think? Is it feasible to incorporate the controls into the V2 firmware.

Ryan

---

Thats a swell idea!!!:thumb_yello:

Quote:

---

Originally Posted by Blacky

It is something that is was available in EFILvie V5. When we brought out RR support, we dropped support for the bidi controlled spark and fuel maps because RR was so much better.

Maybe we can re-instate it in version 8, but it would not be a high priority in the version 8 roadmap.

Regards
Paul

---

Paul any future thought for bringing this back in for V8. It really would be a very attractive feature to have and one that I would use extensively. I do have a RR. But for the most part the work I'm doing on other peoples cars doesn't warrant the time for me to fit and remove it.

Quote:

---

Originally Posted by Blacky

Working on it...
:)

Paul

---

Brilliant. Thats great news.

Quote:

---

Originally Posted by macca_779

Paul any future thought for bringing this back in for V8. It really would be a very attractive feature to have and one that I would use extensively. I do have a RR. But for the most part the work I'm doing on other peoples cars doesn't warrant the time for me to fit and remove it.

---

I will be re-investigating adding that feature to V8, sooner rather than later.
Paul

Quote:

---

Originally Posted by Blacky

I will be re-investigating adding that feature to V8, sooner rather than later.
Paul

---

I will use that alot...:cheers:

DVT in standalone V2...:cheers:

me x2