BB Logging update (March 4th)

Quote:

---

Originally Posted by Blacky

No problem on th eEQ Ratio. I can just make it "F2" to toggle Lambda/EQ.
Regards
Paul

---

and AFR Toggle??????

Well.. the chirps do make up for the bracket in a way.. the other day i was driving and something started CHIRPING and I let of the throttle.. i was like... WTF is that?? after a while.. When I checked the scan...OK COOL>>.. it was FS telling me ... LET OFF YOU MORONIC BASTARD ITS KNOCKING!!!! JAJAJA actually.. I did understand it as i had let off as soon as i heard it.. INTUITIVE!!!!... where are all these features explained????????

As long as we are on the topic...
I made a mount for mine by taking one of those cell phone holders/cradles that clip to your AC vents. I removed the adjustable arms that are on the side, then putting velcro on the surface. There are two little arms to support the V2, and the velcro holds it in place, easy to see and it cant get stepped on. I will post a pic in a few hours.

Here is a link to the one I bought: http://www.radioshack.com/product/in...entPage=search

Quote:

---

Originally Posted by Gelf VXR

It was laying in the passenger foot well.

---

I'd like to see your pictures of that installed

Just got home. Here are some pics.
I run my cables down behind the mount and then tuck them under the center console on their way to the OBD2 port. Easy to install and easy to remove. The LED alerts are very visible while driving too.

Very nice man, I like that mount!

Quote:

---

Originally Posted by Highlander

and AFR Toggle??????

---

AFR is always dislayed. Just Lambda and EQ ratio are toggled.
Regards
Paul

Quote:

---

Originally Posted by Highlander

where are all these features explained????????

---

Ummmm! in the version 8 documentation that is not released yet :frown:

Regards
Paul

Quote:

---

Originally Posted by Goldfinger911

Just got home. Here are some pics.
I run my cables down behind the mount and then tuck them under the center console on their way to the OBD2 port. Easy to install and easy to remove. The LED alerts are very visible while driving too.

---

Cool... :cheers:

the mount looks really good Goldfinger. I've been wanting to figure out a mounting bracket for a while now. Just been lazy.

I was going to make a 2.5mm stereo phone jack to RS232 via a MAX232 converter board but i decided to do this instead and intergrate it all.

http://www.splitpixel.com.au/PLX-RS232.jpg

Now i just plug in the cable (well with a gender bender. I didnt have a male rs232 socket);) Bring it on Paul!!!

Jez

PS I should tap a couple of screw points in there but it does fit nice and snug with just the connector and shouldnt pull out in a hurry