LC-1 widband hook up

Quote:

---

Originally Posted by mr.prick

I just bought one off ebay for $39.68 shipped.

---

I just got it and they still have a few left,
this is a really good price. :secret:

Same guy/place ...

Quote:

---

WE ARE NO LONGER SHIPPING INTERNATIONAL. PLEASE DONT ASK FOR A QUOTE. WE APPOLOGIZE FOR THE INCONVIENIENCE.

---

They probably got ripped off one too many times by Paypal and their buyer protection, with no way of getting to the buyer in any sensible legal way ...

That sucks the price is so high in EU,
I don't need one but for the price I had to buy one.
Hard to believe they still have any left.

Quote:

---

Originally Posted by joecar

The PCM sees the NB output (0.000 to 1.000mV).
EFILive sees the WB output (0.0 to 5.0V) via the FlashScan AD1 or AD2 input.
The LC-1 software lets you setup the LC-1 output voltage ranges (0.000 to 1.000mV for NB, 0.0 to 5.0V for WB); see the LC-1 manual.

---

what are the output voltages supposed to be set at? I thought they were pre-program from the factory for the lc1?

Quote:

---

Originally Posted by smslyguy

what are the output voltages supposed to be set at? I thought they were pre-program from the factory for the lc1?

---

read through the lc-1 guide in the AutoVE tutorial supplied with the software, it shows the correct settings in there for you :)

You use the LM Programmer software (download from the Innovate website).

Quote:

---

Originally Posted by stigmundfreud

read through the lc-1 guide in the AutoVE tutorial supplied with the software, it shows the correct settings in there for you :)

---

i have read through, and just read it again and i can't seems to find the setting for this?

Quote:

---

Originally Posted by stigmundfreud

read through the lc-1 guide in the AutoVE tutorial supplied with the software, it shows the correct settings in there for you :)

---

The LC-1 Tutorial tells you to program the output for WBO2 integration to Flashscan not NBO2 simulation and it is not even necessary if you are using
output #2 (brown) default setting.

Quote:

---

Originally Posted by mr.prick

The LC-1 Tutorial tells you to program the output for WBO2 integration to Flashscan not NBO2 simulation and it is not even necessary if you are using
output #2 (brown) default setting.

---

sorry mr prick its been quite a while since I did this so it was from memory i said it was in the autove manual that gave the information

smslyguy its certainly in the docs supplied with the efi software, for setting up WB as mr prick states. Its such a long time back now I had forgotten I was using serial logging for WB and analogue out for NB, for NB its set 0 to 1 or 0 to 1000mv again memory so am sure joe or mr prick can clarify

off topic but mr prick have you any idea how hard it is to write your name without laughing

My mother doesn't laugh at my name. :redface: