Calc.VET: correcting MAF and calculating VE (in single log)

Yea, it looks like your Calculated Pids all went into the sae.generic text...:confused:

Hopefully the update will clear them out..Your calc_pids.txt should be fine.

Its always good to update 8.1 also..(build 150)..it has the Firmware..but lets see how far you can get..

I just did the update. Wasnt sure bout the 8.1 so i did the 7.5 build 156. I can open both the tune and scan tool.

I will start setting up the maps and stuff for calc.vet

let me know what I need to do for afr. (i am not in a hurry the weather is crappy here, wont be driving the car for a little bit)

Thanks agian for all your help, Joe & Shawn

Joe,

can you change the displacment after you log data or once you are connected to vehicle. ( I dont have a car here to test on now ,but I went back to an old log and I can change it)

Cool..Glad to hear it appears the update worked!

Joe, do you have a E00 Calculated AFR handy? He is using 14.629 as stoich..He is also serial wideband..

Quote:

---

Originally Posted by rpmauto

Joe,

can you change the displacment after you log data or once you are connected to vehicle. ( I dont have a car here to test on now ,but I went back to an old log and I can change it)

---

Yes, like this:

Quote:

---

Originally Posted by joecar

...

then when you first open a log file, go Edit->Log File Information->Vehicle Options, and next to Engine enter the displacement in cc, click Ok, and save the log file...

e.g. for stock displacement LS1 you would enter 5669 next to Engine.

When you save the log file, the displacement is now permanently saved in this log file.

...

---

Quote:

---

Originally Posted by rpmauto

I just did the update. Wasnt sure bout the 8.1 so i did the 7.5 build 156. I can open both the tune and scan tool.

...

---

If you have V1 then you only need V7.

If you have V2 then you need both V7 and V8.

Quote:

---

Originally Posted by WeathermanShawn

...

Joe, do you have a E00 Calculated AFR handy? He is using 14.629 as stoich..He is also serial wideband..

---

I have now...

I added three AFR pids, see attached...

I haven't checked it yet to see if the scantool is happy with it.

Nice work Joe..

Len let us know if you need any more help..

I assume that I should copy Joes calc-pids and overwrite the ones I have?? Then I would have the afr pids I need.

Shawn what pids will I need that that arent listed on the quick start?? Any that I dont need to keep the count down?

I will build the maps and let you know how it goes when I start tuning. Need another shot of rain here to wash the salt off the roads. But I am excited.

Joe, Shawn thank you so much for your help. I will let you know how it goes once I start tuning

Yes, overwrite the attached calc_pids.txt file. It has your customized E00 AFR pid of 14.629, and all the others you need.

I will attach the absolute minimum number of Pids you need..