Flashscan data logging..

Hey Joe,
you should take post #157 and make a sticky for serial WBO2 and
BBL options.txt formatting.

Quote:

---

Originally Posted by joecar

Ok, you have to upgrade both software and bootblock/firmware...

After that, do Help->About in scantool (ST) or tunetool (TT) and it should say build 84.

Start EFILive Explorer (EE), goto Firmware tab, click About, it should say Build 44;

Then, still in EE Firmware tab, update the bootblock to 2.06.02 (checkmark Bootblock box) and the firmware to 2.06.06 in that order.

---

OK.. This should be done. I did not know where to go to see the "build 84" though. EE did say build 44.

Quote:

---

Originally Posted by joecar

After updating the V2 bootblock and firmware (2.06.02 and 2.06.06) as shown above,

read this:
Also, read this:

---

Ok.. This is done.

Quote:

---

Originally Posted by joecar

Use attached Options.txt file, copy it to:
C:\Documents and Settings\All Users\Application Data\EFILive\V8\Config

Then start EE, goto Config Files tab, drag these files from the upper pane to the lower pane:
LS1B_A.pmm
Options.txt

You only need the pmm file for your car (LS1B_A = 1999+ LS1 with A4 transmission (includes 12212156 and COS5)).

Exit EE, and remove USB cable.

---

I dont have that.

http://i279.photobucket.com/albums/k.../efilive-1.jpg

I tried to open one of my tunes to look at a few things and a pop up window came up saying its a "DEMO". Whats that about?

Also, the icons are still saying 7.5

Quote:

---

Originally Posted by waterbug1999

OK.. This should be done. I did not know where to go to see the "build 84" though. EE did say build 44.

---

In scantool or tunetool go Help->About.

Jody,

Do you have Vista...?

For Vista, the location is under C:\Program Data\...

Quote:

---

Originally Posted by waterbug1999

I tried to open one of my tunes to look at a few things and a pop up window came up saying its a "DEMO". Whats that about?

Also, the icons are still saying 7.5

---

Do you have the blue card that came with EFILive...?

Open ST or TT and go Help->Register EFILIve and enter all the information from the blue card exactly as shown on blue card (do not enter your name unless the blue card shows your name).

Copy the attached Options.txt file to either of:

WinXP: C:\Documents and Settings\All Users\Application Data\EFILive\V8\Config
Vista: C:\Program Data\EFILive\V8\Config (I don't remember is this is right).

Quote:

---

Originally Posted by joecar

Jody,

Do you have Vista...?

For Vista, the location is under C:\Program Data\...

---

Yea, its vista.