Thank Fubar i tried that, nothing
Printable View
Thank Fubar i tried that, nothing
It work thanks Fubar
Bumping to the top since some people have been asking about this.
Jan 6th, 2012 update. Supported Transmission tables. A side note for general useage: Just because the paremeter may say, SAE.TP for throttle percentage, CM.TP will also work. This covers other paremeters as well. This gives you more options in which PID clusters you choose to data log. Something that's always been there, just putting it out there.
-Andrew
Thanks for your hard work Andrew in helping to make data usage easy
Thank you sir
Disregard the linking feature in the Boost Fuel Limiter table F0502. It is linked incorrectly and should not be used a reliable link to ScanTool Data logs. Update soon to come.
Any updates or plan for 6.7 tune tool linking?
I have no immediate plans for supporting the 6.7. Lately travel that work and family has got me going, I don't plan on taking on any extra ventures. Heck, I've got an injection pump that has been needing to be installed well over a month that I can't get too for my personal own vehicle. Anyhow, hopefully there will be another fellow 6.7 member that is quite familiar with the software and will take on the challenge of supporting the linking feature.
Thanks for the update and all your work. Your time is much appreciated
Time is limited for me right now too, but I would like to be able to help out, and will be needing the 6.7 features more than the 5.9. I will try to get a start, but testing will be limited as I don't own anything I can log yet (my truck is a 2010). I am working on a couple 08s though, and will post as I make progress, if that will help everyone else. -JoeQuote:
Originally Posted by FUBAR
Thanks a lot.
Here is the updated version 11/1/2012 for 5.9 cummins 2005.5 & 2007 that link scantool other maps
This file has 6.7 links in it.
I cannot guarantee this file will work properly, as I do not have a 6.7 to test with.
Edit: The cal_link.txt below has the 6.7 tables linked to the tune tool as well as all of the above 5.9 edits. I just do not have a 6.7 truck around to verify accuracy. Sorry if the original post was confusing.
Attachment 13976
Sorry this update is for the 5.9 cummins. I do not have 6.7 truck nor do I have the 6.7 cal_link file to modify it to link it to scantool. But if you have cal_link file and a data log file with all the tables that needs to be link I can try working it out for everybody needs. Shoot me an email with both files. My email is: [email protected]
In the attached .zip file is the 6.7 and 5.9 links. They are in the new .ini format for V7.5 Build 232.
Thanks for the update!
Appreciated
I have the newest update V7.5.7(245) but the D0787 Runway highlighting stop working with new update. Is there a cal_Link update to fix the issue or is there a software issue
Cal linking file structure changed some months back - maybe as far back as August.
Each controller now has it's own file.
Cheers
Cindy
Added D0787 for the 5.9.
Where do I install the .ini files?Quote:
Originally Posted by BlackCPG
Or do I even need to with the latest software release?
I'm wondering this as well, is there any need to do this anymore?Quote:
Originally Posted by Moparmatty
Bringing this back from dead...
I’m currently on the latest public release and only see cal link file for CMB..
Can I use this as a template to make a CME link file? Does cal link work for CME contollers?