You didn't do this:
If you do this ^ your engine will start.
Printable View
Just going trough COS & using the 2/3 bar features manual and see there is a lot to be done which I am working on today. In regards to EQR Number 14.63 in properties is still present even after re-opening. will try again. Thank you talk soon with another tun file
Yup thank you starts good now on custom OS. Have spent some time on the program...disabled MAF and emissions, working on proper mapping etc. This is fun will chat soon.
Ok, so your B3647 now shows EQR 1.00 below 80 kPa and EQR 1.175 above 80 kPa...?
Post your current tune file.
~ posted by phone ~
Attachment 21229yes definitely one I corrected the B3647 the truck started. I got confused because the map was filled in AFR even tho measurement was in EQR, therefore it was rich. The truck starts on custom map now. idles rich 10:1 and the map is off at this point second map is lean at the beginning. working on it now but here it is. Appreciate the help!!
any pointers on crucial data for idling
First get VE and/or MAF corected.
otrr
~ posted by phone ~
Thanx again Joe! I have been working on the maps and other factors, truck runs and starts good. Still not perfect by any means but it seams to take 5 psi just fine at this point. One of the issues is that on test runs I am recording 3 to 4 points of retard timing. I have changed the ECM advance to max at 0. Any other pointers on dialing in the ignition timing.
Good day!