I don't know.
Printable View
Is it possible to have a DBW set up with a 4x reluctor ??
No, but if you could identify all of the electronic throttle tables not exposed in EFILive...and come up with a .CAX file...then it might be possible.
Hmm...or I wonder what would happen if you started with an LS1 Corvette calibration and then changed the Vehicle Platform table's Low Resolution Crank value to "Yes". So the question then becomes, what happens in the calibration when this value is changed? Does it enable single coil and distributor ignition?
Speaking of the LS1/LS6 Corvette, there has been one crazy national backorder on the throttle actuator control module. I sure hope my module doesn't go bad anytime soon.
Must be from all them people doing DBW conversions on their TPI and LT1 engines with a kit from some company in PA.... :)
Or it is because maybe GM screwed some vendors with the whole bankruptcy thing, or at least that is what my local dealer keeps saying!!! Whatever it is, hope it gets resolved soon!!!
Mike
Electronic throttle TPI/LT1 is not in demand. It's too expensive for most conversions. The E40 alternative gets around the expensive LS1 TAC, but adds the cost of the E40 and GM TIS-SPS flash. So you really don't come out ahead. As long as the TPI/LT1 electronic throttle body remains billet CNC construction and requires disassembly of a good LS1 throttle body, it's going to remain more of a novelty...and I'll continue to hear the criticism about its price.
Speaking of criticism, someone over at LS1tech.com dropped the F-bomb today about how greedy EFI Connection is. There is so much misunderstanding about the cost of high quality, low quantity (compared to GM products), production.
Yah, people can be funny like that, they like the concept but don't want to pay for it. In this day and age of outsourcing to China for damn near everything, people are used to/expect dirt cheap prices. I would love to swap to DBW on my '71 GMC, but again, the cable works great especially since I got the cruise up and going!!!
BTW, I was being sarcastic in my last post, wasn't trying to ruffle any feathers!!!
Mike
Understood. And yes, I see plenty examples of China products...disguised as some of the top name brands in your Summit catalog. What most don't know is that the profit margin of these large outfits (with China products) greatly exceeds the profit margin of low volume CNC products made in the USA.
yeah I agree, the cost is somewhat high for the 24x stuff. but IMO its worth it and justified. random people like that sometimes don't understand what it takes to develop and manufacture a product of high quality, and with exceptional service to back it up.
Well Said