Calc.VET: correcting MAF and calculating VE (in single log)

Quote:

---

Originally Posted by Frozen WS6

I finally got to get a good log on my 98 after fixing a couple other issues.
Could someone refresh my memory. On my VET average map, is .98 perfect and anything above (higher numbers like 2.27) lean?

---

On the B0101 map: 0.98 and 2.27 look like g*K/kPa values... are these the units you're using...?

On the B5001 map: 0.98 is good value (it's a correction of only 2%); but 2.27 is not a sane value.

Post pic of your maps.

Quote:

---

Originally Posted by joecar

On the B0101 map: 0.98 and 2.27 look like g*K/kPa values... are these the units you're using...?

On the B5001 map: 0.98 is good value (it's a correction of only 2%); but 2.27 is not a sane value.

Post pic of your maps.

---

I do have my map set up as you posted g k/kpa. That's why I had to ask, since those numbers seemed off.

I have to ask. Where will I find the how to post maps off of my scan and what program does it? I've looked through my scan tool user guide and didn't see it. It could be there but I didn't know it.

Thanks

Quote:

---

Originally Posted by Frozen WS6

I do have my map set up as you posted g k/kpa. That's why I had to ask, since those numbers seemed off.

I have to ask. Where will I find the how to post maps off of my scan and what program does it? I've looked through my scan tool user guide and didn't see it. It could be there but I didn't know it.

Thanks

---

Hosting-an-Image

Quote:

---

Originally Posted by joecar

Your map shows cell counts... it should be showing average cell value, click the x-bar (average) button, see pic attached.

Before you do the paste-multiply sanity check your cell values (they should all be close to 1.00, question any cells that are far).

Also, you can constrain the cell width, see attached pic.

---

Thanks for the help, I feel pretty dumb that it was so simple lol.

Quote:

---

Originally Posted by s10mods

Thanks for the help, I feel pretty dumb that it was so simple lol.

---

No worries :cheers:
it's simple once you know how, otherwise it's a sea of buttons :)

Thanks. I hope these work.

http://i297.photobucket.com/albums/m...CVETSELBEN.png

http://i297.photobucket.com/albums/m...LCVETDATA2.png

http://i297.photobucket.com/albums/m...LCVETDATA1.png

http://i297.photobucket.com/albums/m...CVETVETMAP.png

This last pic is the pic of my VET average map with the odd numbers that are really high.

Are you using a wideband...?

Frozen, maybe its my eyes..but the pics were too small for me to read..

I have the same question as Joecar..

I tried to post them larger and had no luck, not sure what I'm doing wrong there. That's why I tried to include the data pages so you could see all the pids being logged.

But I do have a Dyno jet WB 2. My logs seem to match the wideband numbers.

Sorry, I can't read them.

What was your question/concern?