Printable View
Ok, changed the one PE reference in that txt file and it fixed the issue. I had been in that file before changing the wideband formula since I have a V1, but didn't think to reference back to that file for that PE issue. Thanks again for all the help!
Cool :cheers: you're welcome.
Ok, I'm sure I am just missing something small but when I log it just shows 0.0 in the chart for the blocks it's hitting. On my tune I see in the top right that the VE units are % so I chose % when setting my map up. I also have one set up as kpa, and it shows the log values in the chart as 1.1 etc. So, like I said I'm sure it's something small that I have overlooked, but I can't seem to figure it out.
When VE % shows up as zero, then the displacement has not been entered...
Quote:
A. Set Displacement: open a Log File, go Edit->Log File Information->Vehicle Options, and next to Engine enter the displacement in cc, click Ok, and save the log file. This matters only if you're planning to use [%] units for VE.
I had a few other things selected in there. I cleared all the fields and selected only the 6.0 in there and it populated correctly.
Here is an alternate calc_pids.txt file that separates DAT out as a separate pid: calc_pids.txt
This file has pids for both the Calc.VET and Calc.MAFT tutorials.
Hey guys, currently i'm still using the old Auto.x because I get stuck in my ways sometimes :) I'm working on prepping to do Calc.x tune and I just want to clear some things up.
From what i gleaned it appears that the Calc.ve method, correct me if i'm wrong:
1. you run an all maf tune
2. the ben corrects maf
3. the method calculates the ve table
4. if 2&3 above are correct then why is there a Calc.maf?
The Calc.MAF procedure is the opposite/reverse of the Calc.VET...
Calc.VET = corrects MAF and calculates VE
Calc.MAFT = corrects VE and calculates MAF
[ the hint is in the name of the procedure, Calc.VET or Calc.MAFT ]
Also, either procedure can be tailored to use wideband only (i.e. becoming like AutoVE and AutoMAF, but with the bonus of calculating the other table).
Ok that makes sense, thanks!
I used this method the other day and it worked great logging from my laptop. Yesterday I did a black box log and now when i go in and add the calculated pids to the list its saying that SELBEN and VEN are invalid. Its weird because in my other log with my laptop they are valid.