Printable View
I don't think so Josh. I already had B1115 maxed out to 4k.:nixweiss: and Ross didn't change that one one my tune. I'd guess it was b1119, looks like I only had that out to the 3550rpm, I'm a dummy. Although if you had B1119 maxed out, maybe it is B1116 for some strange reason.
Well, I don't know what it is. I just loaded the adjusted tune in my truck and it did nothing for the RPM limit. It still hits a wall at 3500. What am I missing? I did everything you said to do Ross.
I still hit the wall too. It will go past but defuels hard when it goes over 3500. I can get it to 3800 or so, but it has no power
Now my B1122 table I have set to 200, this wouldnt throw it off would it?
Josh send me your tune and I'll look at it. You to snake, if you want. [email protected] not that I know anything, but mine is working, but still defuels.Quote:
Originally Posted by JoshH
sent
I don't know snake, the tables that Ross modded on my tune you've already modded on yours(maxed out the same). Our tunes have a different O.S. so I opened in two windows to compare. I don't see why yours doesn't run like mine, maybe it does.
I was just trying to get past 3500, now I can, but still pulls power pretty hard. We might be in the same boat....or truck.:nixweiss:
yea, sounds like it. I can get it to go past holding it in gear, just nothing there for power. I let off around 3800. Gotta be something in the TCM.
Maybe we can get that stick LBZ at the place to see how his runs above 3500. That would at least rule out the TCM.Quote:
Originally Posted by Cobra#3747
Here is another idea I have been kicking around, just havnt gotten around to it, but if we unplug the TCM it will default to 3rd gear (if I remember right) As long as it dosnt put the PCM in some limp mode that we cant control.
Just was thinking about it, I remember running LB7 with the TCM unplugged, it didnt limp the engine