wrong firmware and boot block

I already pm'd Tech Support.

Quote:

---

Originally Posted by stigmundfreud

similar problem to original post, I skipped the bootloader and ended up with the .20 firmware installed. I can access v2 in deadpole mode but thats all. Tried to downgrade the firmware to then upload the new bootloader only I get error code $008E, a fault caused by trying to install an older version of the firmware....

could do with a little help thanks guys, my own fault just misread the instructions....

---

Which bootloader version is in the device?

You should be able to find out using the "FLashScan Firmware Programmer" software and clicking on the [Status] button.

Regards
Paul

its the 04 instead of 08 bootloader, I'd had the bb running on the earlier release, luckily not the 06 one!

Cheers rich and joe :)

Mike, you got it working...? :cheers:

nope :( :D

It appears a check is now in place to ensure you dont try to flash your v2 with an older version of the flash than the one installed. A logic error perhaps as wouldnt it be better (to cater for us numpties ;)) by ensuring the correct bootloader is installed prior to writing the firmware?

My mistake was I saw the version of bootloader required but didn't recognise, in time, the difference. My fault 100%

What I now need is a means to override the firmware check in order to get the older compatible BBL firmware installed then I can update my bootblock then the firmware....

thankfully, all I need it for at present is to log stft

Quote:

---

Originally Posted by Blacky

Flash in the firmware version FSProgV2_05_15(0326).efw (that matches the V2.05.04 boot block).

Then upgrade the boot block to FSBootV2_05_08(0426).efw
Then flash in the firmware FSProgV2_05_17(0512).efw

All those files should be in the May 12, beta download.

Regards
Paul

---

Mike,

So it won't let you flash in V2_05_15(0326)...?


More info:
showthread.php?t=8834
showthread.php?t=7751
showthread.php?t=7804
showthread.php?t=8085

Spoke to Mike today and I think Paul is going to send him a special version that allows overwrite. Though either of them can correct me if Im wrong.

Quote:

---

Originally Posted by joecar

Mike,

So it won't let you flash in V2_05_15(0326)...?


More info:
showthread.php?t=8834
showthread.php?t=7751
showthread.php?t=7804
showthread.php?t=8085

---

will take another look through the threads tomorrow, just got back from a shameful trip to the strip :( so off to drown my sorrows!

Basically thats correct, I tried to reflash with that an get $008E (iirc) which is "trying to flash with version older than the version currently installed", give it a try ;)

V2 is working it just wont talk thanks to the bootblock, own fault but really need to monitor timing as I'm sure I heard detonation on the strip, though further road tests might have revealed it to be an empty plastic bag rustling under the passenger seat :D

edit to add: Richard, not totally correct not had any conversation of that nature though it might have to be a future feature ;)

One is rather embarrassed, I had read one of blackys posts on the matter but it was for an older version. Using the 015 version it flashed ok, updated the bootblock and now all up to date and working

Feel so stupid especially when I work in similar circles and constantly battling with users, just like me!