Idle Tuning with new pids (calc pid file included

Ok here is what you do to setup that map

Data

Calcuated Idle pid you are interested in

Column
?,8000

Row

Go to the editor and highlight the whole Idle airflow table(B4307). Right click and "copy with labels". Go back to the scanner under the row tab and click "paste Labels" and you are done making this map

In the picture above you have to many ect ranges and to many RPM ranges when you are done loging these pids you just want to go back and hit "paste add" for the range logged and have it do its thing

Thanks Dirk :D

Quote:

---

Originally Posted by Dirk Diggler

Ok here is what you do to setup that map

Data

Calcuated Idle pid you are interested in

Column
?,8000

Row

Go to the editor and highlight the whole Idle airflow table(B4307). Right click and "copy with labels". Go back to the scanner under the row tab and click "paste Labels" and you are done making this map

In the picture above you have to many ect ranges and to many RPM ranges when you are done loging these pids you just want to go back and hit "paste add" for the range logged and have it do its thing

---

Do you have a picture of what you are talking about? A picture tells a thousand words.
When I try the above I get In Gear and Park/Netural as my col and ECT as the row but when I view the map only Parl/Netural show up but I am logging the In Gear PID. How do I get the In Gear PID to show up under the In Gear col?

Thanks,
Bill
:D

I have the four PIDS setup but I do not have a place for the PIDS with A/C on. The idle air flow (B4307) only has two columns. Do you average the two sets of numbers?

Also I assume that when your average is like .050 you add this to your IAC or -.050 you sub.

Bill

I guess no one is using the new PIDS to correct IAC?

Bill

Straight addition, worked for me. First time in a year my Y body idled without hole inTB.

Quote:

---

Originally Posted by BowlingSS

I have the four PIDS setup but I do not have a place for the PIDS with A/C on. The idle air flow (B4307) only has two columns. Do you average the two sets of numbers?

Also I assume that when your average is like .050 you add this to your IAC or -.050 you sub.

Bill

---

use addition. if its -.50 it was say so in the scanner

Quote:

---

Originally Posted by Dirk Diggler

Quote:

---

Originally Posted by BowlingSS

I have the four PIDS setup but I do not have a place for the PIDS with A/C on. The idle air flow (B4307) only has two columns. Do you average the two sets of numbers?

Also I assume that when your average is like .050 you add this to your IAC or -.050 you sub.

Bill

---

use addition. if its -.50 it was say so in the scanner

---

Which pid do you use the w a/c or without? Right now my LTD and LTDPN are reading zero. My LTPNAC is reading .050 and LTDAC is reading -.079 to -.119. What should I adjust for these? Do I adjust my Idle Learn B4331-4330 or B4329-4328?
Thanks,
Bill

Bill
:D

If I am not mistaken I have included descriptions of the new calc pids

Quote:

---

Originally Posted by Dirk Diggler

If I am not mistaken I have included descriptions of the new calc pids

---

I have all four setup in FlashScan. I must be missing something. Can you please explain?

Bill