question on custom os 0202005

Quote:

---

Originally Posted by AllOutPerformance

I understand that Joe but where do i view this to make the changes.

as you said in your email you changed a0001 from 1600 to 99
In mine it was set to 100.And all i saw was 100.Im sorry im just not understanding.Where am i not looking to see what everyone else is seeing.

---

Yes, I saw it being 100 (what the tunetool displayed, the real value was 1600); so I changed it to 99 (less than max display value); I changed all of the OOR's; saved file; exited tunetool;

then, if you really wanted 100, reopen file, change 99 to 100 (now, 100 is really 100 and not 1600); change all the ones you changed; save file.

Tricky. :doh2:

Ok i awnsered my own question lol in a eralier post.So you have to change it regaurdless if the values are the correct values that your going to use.Thanks for the help.Atleast i dont feel like a complete idiot now lol.

Silly.but now i know.Thanks again for the input.Now i can get it finished up.

Quote:

---

Originally Posted by AllOutPerformance

Ok i awnsered my own question lol in a eralier post.So you have to change it regaurdless if the values are the correct values that your going to use.Thanks for the help.Atleast i dont feel like a complete idiot now lol.

---

Yes, if it has blue dogear corners, it is OOR, you have to change it, save file, exit tunetool.

Let us know if it pulls timing on switch trigger.

Ill let ya know tomorrow Joe.Thanks again for all the help sorry for the noob questions.

No worries... OOR's are tricky.

Quote:

---

Originally Posted by TFZ_Z06

Here is a photo in case anyone finds it useful:
High Resolution Photo Red Pin 56:

---

Hi TFZ,

Thanks for the pic :cheers:

Note that the file in your sig has some OOR's:

Quote:

---

EFILive Custom Calibrations
{A0000} Forced Octane Scaler, was out of range when loaded.
{A0001} Forced Octane Scaler Percentage, was out of range when loaded.
{A0002} Octane Scaler Limiter, was out of range when loaded.
{A0017} N20 Monitor VE Multiplier Table RPM Enable, was out of range when loaded.
{A0018} N20 Monitor VE Multiplier Table MAP Enable, was out of range when loaded.

---

and also A0012, A0013 (set these last two to 511 since 512 appears to be OOR).

Quote:

---

Originally Posted by ScarabEpic22

...

Dang, Joe and Andrew beat me to it. Again. :D

---

Yeah, we have armies of robot slaves who transcribe dictation into thread/post replies... :cucumber:

I wish... :doh2: