427 stroker turbo need help on everything

Ok got it calibrated and tuned here is the modified tune and log files. When the truck is running i get a p0200 code. so i am going to check the injector harness.

Attachment 13303Attachment 13304

Ok no need to pancake! it was an injector harness pin that didnt clip in proper from factory. it pushed out slightly when i installed the new harness plugs. all fixed now.

There is something up with your wideband - see how it is spiking all the time to 25 - probably a grounding issue... This is one of the reasons I swear by serial widebands! Gotta figure that out before going much further... Also, make sure to log ECT...

Hey I figured out how to hook up my afr via serial. It is Probly a bad ground as I just pushed the wires into the serial cable plug temporarily. Im out of town till late tomorrow I'll try a new log on wensday with wires fixed and all injectors Workin properly. Hope that will work better Hard wired in with a female serial cable.
Thanks
Brandon

Good deal! Have a safe trip and post up when you can...

Thanks. I will. Crusin right now. Won't get to the site until 2 am, it's going to be a long night. Haha.

Hey
I am still having 02 issues with my wide band... checked all grounds got proper connectors, but its still doing it :Eyecrazy:
Bad thing is I cannot afford to buy another wideband :frown:
Attached is another log.
Attachment 13324 Hope this will do.

Hey everyone im back again. put a tune up a few days ago, You guys find anything else out?

You are going to have to fix the wideband issue... no way possible to tune like that! Have you gone over all of the wiring and made sure you have a good ground? It is absolutely impossible to tune without a properly working wideband... a new one might be a little expensive, but compared to what you have in your engine, isn't it worth it...

hey any reccomendations on a wideband brand?