Printable View
I have had good luck with Innovate... they have several options depending if you want an installed or handheld. I have an LM-2 and like it... Also, TAquickness.com makes serial cables to connect several widebands to EFILive... there are a few places that offer them in packages if you look around...
Ok. I like Perminantly mounted gauges. I keep an eye on things alot. What do you think
Of this? http://bit.ly/Lr8s3N
That would work - but the serial cable they talk about in the ad is not what you need (thats a serial to USB) - you need the sLM2 cable from here: http://www.taquickness.com/taqcables.htm
Hey this may be a stupid question but couldn't I just make a serial adapter that goes from pin 3 data output to pin 2 on the v2? Just an idea not sure if it'd work. My specialty is electrical and machining, I prefer electrical. :p
A serial device connects to the RS-232 serial connection on the V2 as shown in the picture below... and, the other end needs to have a plug to mate with the wideband... unless you have the tools and connectors to make it up, the cleanest way is to purchase a premade cable to aviod any issues...
Ok. I was just thinkin about using the provided efi serial cable and getting the male and female connectors I need to do it but I'll just buy the connector.
my arf gauge will be in on monday! yay! :jump:
Remind me which one you're getting...
Hey Joe
I just got the Innovate MTX-L afr gauge.
Sadly to my suprise I installed it and hooked it to power and.......NOTHING...... no power, flicker, error codes, nothin. :cussing: :crash:
Soo im going to be on the phone tomorrow trying to figure this one out.
Wish me luck.
How did you connect it...?