They way it is now, is just brown for + and a ground I zipped into the floorboard (took the paint off of coarse) and called it -.Quote:
Originally Posted by joecar
Printable View
They way it is now, is just brown for + and a ground I zipped into the floorboard (took the paint off of coarse) and called it -.Quote:
Originally Posted by joecar
Oh no, I dont know what that means?Quote:
Originally Posted by joecar
Post one of your log files (use the Manage Attachments button)...Quote:
Originally Posted by waterbug1999
If your LC-1 is set to default, then in the EFILive software scantool you would be using the pid CALC.AFR_LC11.
Jody, and others using the LC-1,
Try this Options.ini for displaying LC-1 standard default analog AFR...
First open the .zip file and save the .ini to your hard disk (overwrite your old Options.ini);
then using EE drag the new Options.ini to the Config Files tab, overwriting the old file.
On the V2, go into Edit Settings... and set A/D Pids to Yes.
Then during logging (pids are shown updating on the V2 LCD), scroll down to the bottom, you will see AD1 and AD2...
press the Enter key and AD1 and AD2 will change to AFR_WB1 and AFR_WB2...
-->> I haven't tried it yet, so let me know if it works or not.
Cheers
Joe
:cheers:
the V2 and everything else is in the car and ready for a trial run tomorrow.. The lap top will join that stuff pretty soon as well.
Joecar, thanks a lot oh wise one! ill post up tomorrow and let ya know if I ran into any problems.
Ended up getting a personal best at 10.71 @ 126 and a 10.77 @ 126. Here are a couple of vids.. I logged, or think I did log 2 N20 runs. How do I retrieve them again?
http://www.youtube.com/watch?v=qmNpy2rHi3s
http://www.youtube.com/watch?v=HJ2jtECCb6w
Isnt that the log?? I forgot what you told me on Friday..
http://i279.photobucket.com/albums/k...ilivepicss.jpg
Good ET...:cheers:
Goto the Scan Files tab, the log should be there (filename looks like BBLxxxx.efi)...
drag the .efi file(s) up to the top pane (first select the folder in the top pane).
I dont see anything...
http://i279.photobucket.com/albums/k...99/scanlog.jpg
ok.. i got it. it wasnt recognizing the SD card was present. I had to pop it out, then put it back in then a refresh. And it reads it now.